Vertical Power Steering Fluid Reservoir Tanks, Aluminum
Vertical Power Steering Fluid Reservoir Tanks, Aluminum
Speedway Motors

|

#91032876

Vertical Power Steering Fluid Reservoir Tanks, Aluminum

  • Upper fitting is AN 6 male which allows for easy attachment of your return hose
  • Lower connection is available in your choice of AN 8 or AN 10 male for the fluid supply to your pump
  • Vented cap allows excess pressure to be released
See More

Color:

Select a color

Pickup Size:

Select a pickup size

Starting from

$69.99

/each

In Stock


Quantity

Need Help? Call to Order

Add to a list

Share

Select a vehicle to verify Fitment

Select Vehicle

Product Summary

  • Upper fitting is AN 6 male which allows for easy attachment of your return hose
  • Lower connection is available in your choice of AN 8 or AN 10 male for the fluid supply to your pump
  • Vented cap allows excess pressure to be released
  • Mounting brackets for roll bar or flat panel are available separately
See more details

Key Specs

MFG. Part #Select Pickup Size and Color
Inlet Fitting-6 AN
Overall Height9.00"
Overall Diameter3.50"
Outlet FittingSelect Pickup Size and Color
See more specs

Need To Know

Need help?

855.313.9176
View the Help Center

Quick and Easy Returns

Return Policy

Details

  • Vertical mounted power steering reservoir tank
  • The top return fitting is the industry standard AN 6 size
  • Available with AN 8 or AN 10 outlets
  • These tanks are NOT internally baffled. 
  • Bracket sold separately
  • The bracket can be welded to the tank, strapped to the tank with hose clamps, or custom-mounted to suit your needs. 

Specs


Specifications

KEY SPECS
MFG. Part #Select Pickup Size and Color to see
BrandSpeedway Motors
Inlet Fitting-6 AN
Overall Height9.00"
Overall Diameter3.50"
Outlet FittingSelect Pickup Size and Color to see
Capacity30 fl. oz.
Material TypeAluminum
FinishSelect Pickup Size and Color to see
Power Steering Pump StyleRemote
GENERAL
Sold in QuantityEach
Weight1.5 lbs.
NotesSelect Pickup Size and Color to see

Ratings & Reviews

3.9

46 Reviews

Overall Assessment

Customers praised the product as an excellent value for money and lauded its solid construction quality, stating it works great for most applications. Many found it a practical and visually pleasing addition to their vehicles. Some specifically mentioned its usability in custom power steering setups and how the reservoir was lightweight, easy to mount, and better than standard plastic alternatives. Many recommended purchasing, citing its performance and quality as superior than others in this price range. A few said the tank was perfect for power steering on various vehicles and praised its functionality and design. Some customers expressed concerns with the material's thinness and few others had experienced leaks. Despite these drawbacks, many users remained satisfied and recommended the product for its overall practicality and quality ratio.

Write A Review

3.9

46 reviews

5

27

4

7

3

2

2

2

1

8

Most Liked Positive Review

4.0

Good for the money

I purchased this tank for my project I ended up getting the bracket that is sold separately as well. The tank is well made and is better than I would have expected. I do wish that there was an additional -6 port. I will have to add one since the tank I purchased will be used in a hydro assist application. The -10 fitting is nice however it is less common and harder to find parts for.

Most Liked Negative Review

2.0

Faulty Fitting!

I have seen from the other reviews that this seems to be a common problem. I finally got the point in my project where I could install the reservoir and plumb the system, but now I am having to drain the system after only firing up the motor 6 times. Why you ask? Because the bottom fitting appears to be only crimped and leaks like a sieve. Out of all the products that I have purchased from Speedway this is my first disappointment. I am now scrambling to get the fitting welded up (aluminum) or replace it before the maiden voyage of this vehicle on 8/15/13.

Filter by Ratings

Yes I would buy this part again

4.0

2 years ago

Friend

Bark River Michigan

Verified

It was going on my race car my sport mod what I like about it it was very reasonably priced . I buy 99% of my race parts from use if used check you will probably find that I spent over $1,000 so far this year and parts I am very satisfied with the parts service and delivery

Would Recommend

Works Great!

5.0

2 years ago

Jim

Anniston, AL

Verified

Works Great on my bomber car!

Would Recommend

Worked good, have had a few on other cars

5.0

2 years ago

Soncho

Citra, fl

Verified

Worked great

Would Recommend

Would buy again

5.0

3 years ago

Jim

Iowa

Verified

Exactly what I needed

Ps reservoir

5.0

3 years ago

G mm an

Ca

Verified

Good looking unit. First one leaked second one ok.

Would Recommend

Junk thin material broke after half a night of racing

1.0

4 years ago

Anthony

Indiana

I put this reservoir on my modified and the bottom an10 fitting broke off a few laps into the feature. It's made with thin junk material and if they're gonna use that material they need to have someone weld the bungs so that they put forth a quality product.

Would Not Recommend

No

1.0

4 years ago

watsup

colorado

Verified

Very thin and flimsy

Would Not Recommend

I had this same reservoir on my car for years

5.0

4 years ago

Bill

Prescott Valley, AZ

Verified

Replaced old reservoir as it was leaking from the bottom fitting, due to excessive vibration from the cam in the car. The old reservoir has been in my car for many years and worked fine.

Would Recommend

Great value for money

4.0

5 years ago

Dale Junior

Nelson, NZ

Verified

Very good value for money, not too big and not too small for most applications. Good quality.

Would Recommend

I would buy again

4.0

5 years ago

mack

AR

Verified

look good

Would Recommend

Load More Reviews

Showing 10 of 46 reviews

Questions & Answers

8 Questions • 10 Answers

What PS remote reservoir and lines should I get for my 350 Chevy engine I'm putting in a Chevy 3100 truck?

by Dennis

• 6 years ago

1 answer

View Answer

Is this sealed or vented? Where does it vent, if it is vented.

by Jeff

• 7 years ago

1 answer

View Answer

Is the -10 outlet have to be a high pressure hose/fittings?

by Clueless

• 9 years ago

1 answer

View Answer

Is this reservoir offered in black finish?

by Mike

• 10 years ago

1 answer

View Answer

What is the diameter of this item?

by Jay

• 11 years ago

1 answer

View Answer

i bought this tank with the wrong size fitting on the bottom,i removed it, and was going to get the right one,but i cant find a fitting that will fit.can you tell me what size the male end on the bottom is.I have and ordered a an10, but i need a an8 is there something you guys can recommend.i bought it a while ago

by eric o 51 f1

• 11 years ago

1 answer

View Answer

tank volumn

by seniorman

• 11 years ago

1 answer

View Answer

Does this tank have a swirl action return fitting?

by autoxmatt

• 12 years ago

3 answers

View Answers

8 of 8 questions shown

Customer Impersonation Script