Universal Remote Master Cylinder 7/8 In & Clutch Slave Cylinder

Master Cylinder

Six different bore sizes and four different installation configurations are available in this master cylinder kit. Precision machined from high strength aluminum, this kit includes both small and large size reservoirs which can be mounted for more convenient service access. Standard mounting bolt hole configurations provide easy applications for racing and off road vehicles, specialty cars, recreation and industrial vehicles.

• Includes small and large reservoirs which can be direct or remote mounted
• Aluminum cylinder with plastic reservoir tank
• Mounting flange is a vertical pattern on a 2-1/4" on center
• Master cylinder has a single 3/8-24 brake line outlet
• The two side mount holes are 3" from center to center

Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.

Slave Cylinder

Push type slave cylinder with 7/8" bore size. Has approximately 1.25" of travel. Inlet fitting that comes on the cylinder is 3/8 x 24 IFF. Has 2-3/8" mount bolt centers. 

Pushrod sold separately (910-25606).

Note: If you want to plumb AN3 or AN4 lines, order 1/8 NPT to AN3 or AN 4 in either straight, 45 degree, or 90 degree and remove the fitting that comes installed.

70174 Instructions(PDF)