|
#91031445
Universal Power/Manual Master Cylinder, 1 Inch Bore
- High-tech corvette-style master cylinders were designed using OE specifications and 100% tested
- Features a 1" bore and are suited for disc/drum combinations
- Each master cylinder has 3/8"-24 IFF outlets on both the left and right sides allowing for installation in many different applications
$77.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Product Summary
Universal Fit, Disc/Drum Brake System Type, Natural
- High-tech corvette-style master cylinders were designed using OE specifications and 100% tested
- Features a 1" bore and are suited for disc/drum combinations
- Each master cylinder has 3/8"-24 IFF outlets on both the left and right sides allowing for installation in many different applications
- Design features a mating flange that works with applications requiring 3-1/8” through 3-3/8” bolt patterns
- Will work with manual or power brake systems
Key Specs
| MFG. Part # | 91031445 |
| Brand | Speedway Motors |
| Master Cylinder Bore Size | 1 Inch |
| Master Cylinder Material | Cast Iron |
| Finish | Natural |
Need To Know
Need help?
855.313.9176Quick and Easy Returns
Return PolicySpeedway Motors 91031445 Details
Speedway Motors 91031445 Details
These high-tech Corvette-style master cylinders were designed using OE specifications and 100% tested. They have a 1" bore and are suited for disc/drum combinations. Each master cylinder is ported on both the left and right sides, allowing for installation in many different applications. This exclusive design features a mating flange that works with applications requiring 3-1/8” through 3-3/8” bolt patterns. These master cylinders will work with manual or power brake systems and can be quickly changed with the included adapter pin to plug the deep well. The wide body and low profile gives this master cylinder the clearance you need when installing in tight areas and yet it maintains a large volume of fluid necessary for 2 and 4 wheel disc brake applications.
- 1" bore
- 3/8"-24 IFF outlet ports on both sides
- Plugs are included for the unused ports
- Mount spacing is 3-3/8", accommodates 3-1/8" applications
- Works with power or manual brake systems
- Compact, for installation under the floor or on the firewall
- Suited for either disc/disc or disc/drum combinations
- Stroke of this master cylinder is approximately 1-1/16"
- Has a piston adaptor that will allow for power or manual applications
Learn more about selecting the proper master cylinder for your vehicle by reading our tech article.Brake System Selection.
Charts
Guides & Documents
Speedway Motors 91031445 Specifications
Speedway Motors 91031445 Specifications
| KEY SPECS | |
|---|---|
| MFG. Part # | 91031445 |
| Brand | Speedway Motors |
| Master Cylinder Bore Size | 1 Inch |
| Master Cylinder Material | Cast Iron |
| Finish | Natural |
| GENERAL | |
| Brake System Type | Disc/Drum |
| Outlet Count | Tandem |
| Reservoir Type | Integral |
| Stroke | 1.0625" |
| Reservoir Included | Yes |
| Number of Mounting Holes | Two |
| Master Cylinder Cap Included | Yes |
| Master Cylinder Bail Type | Double Bail Wire Zinc Lid |
| Outlet Fitting | 3/8"-24 IFF |
| Overall Width | 4.5" |
| Overall Height | 4.75" |
| Mounted Length | 8" |
| Centerline of Holes | 3.38" |
| Sold in Quantity | Each |
| Bowl Design | Dual |
| Master Cylinder Usage | Brake |
Ratings & Reviews
4.8
90 Reviews
Customers highly recommend the Speedway product for its good quality and practicality, especially when updating to modern brakes. Its low profile was praised for fitting perfectly underneath various car models, and the universal fitment with holes on both sides was considered a useful feature. It successfully improved braking safety and had a noticeable ease of stopping compared to single chambers. The master cylinder was also lauded for being big, heavy and holding a lot of fluid. Customers have faced very few issues and greatly appreciated its reliability. However, there were criticisms for the lack of adequate installation instructions and incomplete delivery in some cases.
Ratings & Reviews
4.8
90 Reviews
Customers highly recommend the Speedway product for its good quality and practicality, especially when updating to modern brakes. Its low profile was praised for fitting perfectly underneath various car models, and the universal fitment with holes on both sides was considered a useful feature. It successfully improved braking safety and had a noticeable ease of stopping compared to single chambers. The master cylinder was also lauded for being big, heavy and holding a lot of fluid. Customers have faced very few issues and greatly appreciated its reliability. However, there were criticisms for the lack of adequate installation instructions and incomplete delivery in some cases.
4.8
90 reviews
5
77
4
10
3
0
2
1
1
2
Most Liked Positive Review
5.0
This item definitely gets the job done!
Actually tried a few different master cylinders and this is the one that worked the best for my setup. I did a brake conversion on my 65 Impala and got the stopping power I needed and the brake pedal feel I wanted.
Most Liked Negative Review
1.0
I need to talk to customer service about
In less than a year I've had to buy 2 of these items, the mechanic said the first Master Cylinder was not functioning properly so I had to buy a second one, I don't even know if the first one is under warranty
Filter by Ratings
Great Master cylinder
5.0
2 months ago
Smith
Central Ky
Verified
If you don't want a power booster this master cylinder works awesome for disk front drum rear brakes
Would Recommend
Yes, I would buy this part again
5.0
3 months ago
JD
NY
Verified
I've purchased this part from you many times in the past. Perfect master cylinder for the hot rods. I built.
Would Recommend
I've used this in the past.
5.0
3 months ago
Merc man
Central Florida
Verified
Easy fit for street rods with fittings on both sides.
Would Recommend
Works!
5.0
3 months ago
Southern Champion Garage
Flomaton, AL
Verified
Had to do some research on this but works perfectly for an upgrade on 63' C10! Install video coming over on YouTube #SouthernChampionGarage
Would Recommend
Very Usefull
5.0
4 months ago
Advo
Minneapolis
Verified
Have retrofitted three Studebakers
Would Recommend
Great product
5.0
5 months ago
Dizzy66devil
Thunder Bay Ontario Canada
Verified
Easy to install
I would buy again
5.0
8 months ago
Mewkes
Colorado
Verified
Great part. As described. Bolted right in
Would Recommend
Perfect Fit! Works great!
5.0
9 months ago
HillbillyLlamma
Minnesota
Verified
Used on my 1954 Ford Crestliner. Fits great! Works great! I have drum brakes on all four corners. Nice to have the added security of a dual reservoir.
Would Recommend
Product worked as advertised
4.0
9 months ago
LD
Wenatchee Wa.
Verified
Found it to be just what I needed
Would Recommend
Worked Great!
5.0
a year ago
MikeD
Chattanooga, Tennessee
Verified
Installed along with a dual diaphragm 8" brake booster on a 1962 Chevy II Nova. Bench bleeding was easy and it bolted right in with no issues. Having ports on both sides of the unit was a great benefit for the install since this car had existing brake lines on the passenger side of the master cylinder. The unit was well made and worked perfectly with the disc/disc setup in the Chevy II. Highly recommended product.
Would Recommend
Showing 10 of 90 reviews