|
#91131052
$8.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Need help?
855.313.9176Quick and Easy Returns
Return PolicyYou can use these LED's for almost anything from dash lights to front turn signals. Simple push-in installation with bezel. Direct hook up for 12 volts, negative ground and does not require a resistor.
Available in amber, green, blue, white and red colors.
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | Select Color to see |
| Brand | Speedway Motors |
| GENERAL | |
| L.E.D. Color | Select Color to see |
| Sold in Quantity | Each |
| Voltage | 12 volts |
4.4
63 Reviews
Customers appreciate the product, particularly its use as a high-beam, turn signal, and dashboard indicator lights. Its brightness, small size and versatility for multiple applications, including vintage vehicles and street rods, are particularly highlighted. The product is well-received for its successful performance and ease of use, despite wires being delicate. It is considered a superior choice, several customers admitted they would recommend it, highlighting its quality and durability. Critics, however, point to the light gauge wiring, advising soldering rather than crimping for effective connections.
4.4
63 reviews
5
42
4
12
3
4
2
2
1
3
Most Liked Positive Review
5.0
perfect for my application,
Speedway provided quick shipping and good communication. I installed manual suicide door safety pins w/micro switches on my coupe and installed these lights in my dash to alert me if either or both pins are not engaged...they work perfect. I have active grandchildren, that when I take them for a ride in my hot rod, I always worry about them bumping the door handle, disengaging the bear claw latch and having the door ripped off the car. Or even worse falling out while underway. These lights are large enough and bright enough to get my attention.
Most Liked Negative Review
3.0
Bright enough but delicate
Drill the right size hole and push them in.Very fine wire, best to solder the terminal onto the wire ends instead of crimping. Put the light in the hole first then solder the end on. Don't pull to hard on the wires they will come out of the light bulb socket and can't be fixed. I ordered a second set because handling the one's I put in last year, I broke the wires. Just be careful with them. I like how they look.
Filter by Ratings
Yes
4.0
10 months ago
My Ford
Ill
Verified
Indicator light for the turn signals. And the bright head light. 2 for temp and battery indicators.
Yes, I would buy this product again.
5.0
2 years ago
Roger
Sparks Nv.
Verified
Nice and bright, love it.
Would Recommend
Yes
5.0
3 years ago
Jim
Clovis Ca
Verified
Dash lights
Would Recommend
I would buy this again.
2.0
3 years ago
Jim
Irviine, Pa.
Verified
I use the bulb as a turn signal. They work fine. I was lucky that I ordered an extra bulb as the one wire came out of the bulb. I could not repair it. I am committed to use the 1/4 bulbs.
Would Recommend
Yes
5.0
3 years ago
Walt
Wabash in
Verified
Worked great
Would Recommend
Fits perfect into my retro Camaro project.
4.0
3 years ago
Howard
Lincoln, NE
Verified
Using as turn and high beam dash lights
Would Recommend
Product works well.
5.0
4 years ago
Hans
Waite Park, MN
Verified
The LED lights work well in my 1951 GMC truck dash.
Would Recommend
Worked out just fine!
5.0
4 years ago
Tennessee Troubadour
Norwalk, CT
Verified
Was unsure about replacing a bulb with an LED,but it worked out great!
Would Recommend
Perfect
5.0
4 years ago
Ricky Bobby
Kansas
Verified
Use it as a neutral indicator on my modlite perfect size and brightness
Would Recommend
Not if there was an alternative
1.0
4 years ago
Phil
Kansas City, Mo
Verified
Non noted
Would Not Recommend
Showing 10 of 63 reviews
4 Questions • 9 Answers
What guage wire are the leads?
by Ricki
• 3 years ago
1 answer
View Answer
What wire is hot? Dumb question but we have a red and a black using them for turn signal indecators, thanks
by George
• 9 years ago
4 answers
View Answers
drill size
by jonesz
• 11 years ago
1 answer
View Answer
How are the two wires hooked up? Does it matter which is 12v and which is ground?
by Harbormaster
• 12 years ago
3 answers
View Answers
4 of 4 questions shown
