|
#9100497
$104.99
/kit
In Stock
$106.98
Save $1.99
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Single Joint Universal Joint Style, 3/4" DD End #1
Comes as a Kit
View Kit Components
| Universal Joint Style | Single Joint |
| End #1 | 3/4" DD |
| End #2 | 3/4" DD |
| Shaft Diameter | 0.75" |
| Spline Count | No splines |
Need help?
855.313.9176Quick and Easy Returns
Return PolicySteering U-Joint
These polished stainless steel steering U-joints look great and use a pinch bolt on each end for easy installation.
This particular steering universal joint is made to fit 3/4"DD shafting on both sides. Both sides incorporate the pinch bolt design.
Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.
NOTE: These u-joints contain a safety feature that requires the DD steering shaft to be notched for pinch bolt clearance. Once notched, the pinch bolt MUST be torqued to 45 ft/lbs to ensure a tight fit.
Steering Shaft Heim
Support your custom steering shaft with the perfect heim joint - designed specifically for hot rod steering shafts!
Application
When purchasing U-Joints, 3 easy steps will help ensure that they will be correct for your application.
STEP 1
Be sure to measure the diameter of the shaft and count the number of splines on the shaft. Some shafts have a blank spot ground on one side. To get the correct number of splines, use a flat edge and cover the blank half of the shaft through the diameter and count the splines on the other half. Multiply that number by 2, thus giving you the total number of splines on the full circumference of the shaft.
STEP 2
Choose which shaft type best suits your application: 3/4" weld on, 3/4" DD or 1" DD.
STEP 3
With these two pieces of information at hand, refer to our chart to find the appropriate part number of the ujoint for your specific application.
Guides & Documents
| KEY SPECS | |
|---|---|
| MFG. Part # | 9100497 |
| Brand | Speedway Motors |
| Universal Joint Style | Single Joint |
| End #1 | 3/4" DD |
| End #2 | 3/4" DD |
| Shaft Diameter | 0.75" |
| Spline Count | No splines |
| GENERAL | |
| Spline End | No Splines |
| Overall Length | 3.75" |
| Outside Diameter | 1.89" |
| Max Operating Angle | 38 ° |
| Set Screw Included | Yes |
| Material Type | Stainless Steel |
| Finish | Polished |
| Sold in Quantity | Kit |
5
2 Reviews
Customers highly regard the product for its perfect fit and decent quality, highlighting its practicality. The product's major features, like its compatibility and functionality, are validated. Customers recommend our product over others for its confirmed qualities, setting it apart from competitors.
5
2 reviews
5
2
4
0
3
0
2
0
1
0
Filter by Ratings
Perfect replacement!!
5.0
3 years ago
Woody
Wausau WI
Verified
Perfect fit and decent quality.
Would Recommend
Good product
5.0
3 years ago
Tony
Peoria Az
Verified
Fit and worked as needed
Would Recommend
Showing 2 of 2 reviews
Be the first to ask a question.
