UniSteer 8050430 U-Joint, 9/16-26 Spline to 3/4 Inch Smooth

These polished stainless steel U-joints look & function beautifully and use non-pinch bolts which will need to be either welded, cross-drilled and pinned or bolted.

The outside diameter of this steering universal joint is approximately 1.25" and the length is approximately 3.75" 

Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

Item Details

Stainless Steel
Not a pinch bolt style u-joint

When purchasing U-Joints, 3 easy steps will help ensure that they will be correct for your application.

STEP 1
Be sure to measure the diameter of the shaft and count the number of splines on the shaft. Some shafts have a blank spot ground on one side. To get the correct number of splines, use a flat edge and cover the blank half of the shaft through the diameter and count the splines on the other half. Multiply that number by 2, thus giving you the total number of splines on the full circumference of the shaft.

STEP 2
Choose which shaft type best suits your application: 3/4" weld on, 3/4" DD or 1" DD.

STEP 3
With these two pieces of information at hand, refer to our chart to find the appropriate part number of the ujoint for your specific application.