Unisteer 1928-32 Ford Cross-Steer Rack and Pinion

#91032245

Unisteer 1928-32 Ford Cross-Steer Rack and Pinion

Name: Unisteer 1928-32 Ford Cross-Steer Rack and Pinion
Brand: Speedway Motors
SKU: 91032245
Price: 639.99 USD
Availability: InStock
Rating: 4.8 (35 reviews)

35 Reviews

30 Questions

Designed to replace the common Vega steering box, this rack and pinion assembly has a long passenger-side tie rod that hooks up to the right spindle like a Vega-style drag link
The racks have 9/16" 26-spline input shaft
Specify 11/16" or 5/8" tie rod thread, 5/8" is used with a LH heim joint, 11/16" is used with a LH tie rod end, outer tie rod and jam nut sold separately

$639.99

/kit

In Stock

$652.98

Save $12.99

Quantity

Need Help? Call to Order

Add to a list

Select a vehicle to verify Fitment

Select Vehicle

Product Summary

Cross Steer Rack Type, 3.75 Turns Lock to Lock, Chrome

Designed to replace the common Vega steering box, this rack and pinion assembly has a long passenger-side tie rod that hooks up to the right spindle like a Vega-style drag link
The racks have 9/16" 26-spline input shaft
Specify 11/16" or 5/8" tie rod thread, 5/8" is used with a LH heim joint, 11/16" is used with a LH tie rod end, outer tie rod and jam nut sold separately
Upgrades your steering ratio to 3.75 turns lock-to-lock over the Vega box which has 5 turns lock to lock offering quicker, more responsive steering
Rack unit is mounted on a sturdy bracket which bolts to your existing Vega box mount for easy DIY installation

Comes as a Kit

View Kit Components

See more details

Key Specs

MFG. Part #	91032245
Brand	Speedway Motors
Rack Type	Cross Steer
Finish	Chrome

See more specs

Need To Know

Need help?

855.313.9176

View the Help Center

Quick and Easy Returns

Return Policy

Speedway Motors 91032245 Details

This is a great new concept for street rods with tubular or I-beam axles. It's hard to visualize how this works, but it's the hottest new idea out there!

Designed to replace the common Vega steering box, this rack and pinion assembly has a long passenger-side tie rod that hooks up to the right spindle like a Vega-style drag link. The rack unit is mounted on a sturdy bracket that bolts to your existing Vega box mount. The rack mounts much lower and farther forward than a box to provide more clearance, and those who have installed the system report quicker steering response and easier effort than a steering box.

The racks have 9/16" 26-spline shafts and the extension shafts are 5/8" 36-spline, just like a Vega box.

Specify 11/16" or 5/8" tie rod thread. The 5/8" is used with a LH heim joint, 11/16" is used with a LH tie rod end. Outer tie rod and jam nut not included.

If you are using heim ends, you may wish to order heim 175-0316 and jam nut 910-01056. If using tie rod ends, you may wish to order tie rod end 910-02919 and jam nut 910-01159.

This cross steer rack set up is for converting an existing hot rod with Vega steering to a cross steer rack and pinion. It is NOT a direct replacement on an original 1974 Vega. It bolts on in the same location as a Vega box on the hot rod applications and drops the rack lower so the drag link is more inline with the tie rod. It requires an extension from the input shaft to the existing column or u-joint since it is lower than the Vega box. It needs to be ordered for 5/8" heims or Ford Tie rod end for attachment to the steering arm on the passenger side of your hot rod.

This rack is designed to fit the frame widths on the 1928-32 Ford cars and vehicle weight in the 2500 pound range and is designed to work well with a spring over 4" drop axle.

Replaces the common Vega steering box
Has a long passenge-side tie rod that hooks up to the right spindle like a Vega-style drag link
Rack unit is mounted on a sturdy bracket which bolts to your existing Vega box mount
Has 9/16" - 26 spline (Input shaft)
Specify 11/16" or 5/8" tie rod thread
Outer tie rod and jam nut not included

Charts

910-32245 Instructions (PDF)

Cross Steering Tech Tip (JPG)

Specs

3.75 turns lock-to-lock
Total stroke of 5.25”
From the back side of the frame mount to the end of threads on the Rack is 19.5" 2.0" of that is threads.
Drag link tube is 16.5" long
Assembled this is 34.0" long with about +1.0" - +1.5" of adjustment.

Guides & Documents

Rack and Pinion Assemblies Installation Instructions (91032245)

Rack and Pinion Assemblies Technical Information (91032245)

Speedway Motors 91032245 Specifications

KEY SPECS
MFG. Part #	91032245
Brand	Speedway Motors
Rack Type	Cross Steer
Finish	Chrome

GENERAL
Turns Lock to Lock	3.75
Sold in Quantity	Kit
Notes	Bolt 926-620220 for this kit.

Ratings & Reviews

4.8

35 Reviews

Overall Assessment

Customers rave about the product's excellent fit, stating it improves steering dramatically. The rack and pinion option is appreciated for replacing Vega style boxes. The product is highlighted for its quality and a confidence-inspiring solution for straight axle projects. Safety and smooth operation are confirmed by users. The product has consolidated its place in the market due to its outstanding performance, fitting perfectly into compact spaces. Some users pointed to a minor decrease in turning radius, but overall, they find the experience equivalent to cars with power steering. They emphasized the superior steering when compared to a Vega box. The product is described as the best solution for straight axle cars and is highly recommended for its perfect fit, easy installation, and significant improvement in steering and handling. However, one reviewer noted the rubber boot had shown wear after four years.

Write A Review

4.8

35 reviews

Most Liked Positive Review

5.0

Excellent Product

The steering in my Model A with the Vega steering box was lousy and felt like it had a delayed response. My 2 friends with hot rods with Vega boxes were not much better. The Rack and Pinion Conversion Kit fit perfectly and steers the car great. Right away I tested for "bump steer" and found NONE !!! The rack fits nicely and doesn't hang down lower the the Vega box did. The only problem I encountered was that with a 4" dropped axle you HAVE TO HAVE the "Unisteer 8050020 Cross-Steer Rack and Pinion Steering Shaft Extension". The layout of the advertizement did not show this and I found it by accident. I also want to add that the people at Speedway are excellent. I was going to get rid of the car because it handled so bad. After installing the rack and pinion kit it is precise and responds accurately and smoothly An unexpected benifit is that now the Model A turns much sharper. Steers like a sports car and accelerates like a hot rod. I'm very happy.

Most Liked Negative Review

1.0

naff

Bought this several years ago, never put on road but the rubber gaitors have perissed at both ends of both ends. Expensive part but not good quality.

Filter by Ratings

Sort Reviews

great rack !

5.0

9 months ago

avc

durham ct

Verified

fits as it should

Would Recommend

Rack for 30 model A street rod

5.0

a year ago

Mike

Wyoming

Verified

Worked as expected. Almost no slack in the steering and turns easier.

Would Recommend

great product but will not work now with my project

5.0

2 years ago

speedster

Pennsylvania

Verified

This product ended up not fitting my build. But not your fault at all

Would Recommend

great product wish I would have found it earlier

5.0

2 years ago

woody

San Saba,Tx

fit in my 32 5 window perfectly improved the steering dramatically

Would Recommend

Nice looking unit

5.0

3 years ago

Stow, Ohio

Verified

It's pretty cool having an option to replace a Vega style box with a rack and pinion. I haven't mounted it yet. After inspecting the unit, it looks like it very good quality. I'm confident it will work great for my straight axle project.

Would Recommend

If needed

5.0

3 years ago

Darla Satterfield

New Holland Ohio

Verified

Great customer service and support !

This is a product I bought earlier from Speedway.

5.0

4 years ago

"Lucy"

Northern New Mexico, USA.

Verified

This is the safest, smoothest steering around.

Would Recommend

Way better than expected

5.0

4 years ago

Konquer Chris

Kelowna, Canada

Verified

Installed this piece on a straight axle '54 Chev truck instead of a power steering system and this works amazing. Much easier than "armstrong" steering and maintains the feel of the road. Light weight and small so it fits easily within the space. Would use this over and over again.

Would Recommend

Great product ..easy install...no surprises

5.0

4 years ago

Cooper

Kimball Michigan

Verified

Replaced complete steering setup with ididit column and unisteer...works great

Would Recommend

this is the fix

5.0

5 years ago

Vern

Michigan

I put this in my bone stock 1931 Model A , it's as close as you can get to plug and play , minimal fabrication , can't even see it from the outside , tucks up in place , small unit , easy as it gets , I would and probably will do this again in a heart beat .

Would Recommend

Load More Reviews

Showing 10 of 35 reviews

Questions & Answers

30 Questions • 12 Answers

Sort Questions

I have a stock '30 model A frame, I am thinking I need to use 91032245. Do I also need 91632005?; I currently have no steering box mounted and have tried the Corvair reverse traditional steer box,9109287 , but have no room for it and the headers. Thank you, Steven

by steven

• 4 years ago

1 answer

View Answer

Do you guys have this in right hand drive for us Aussie Hot Rodders?

by Fitzie

• 7 years ago

1 answer

View Answer

When using this unit to replacing a Vega steering box does the steering shaft remain in the same position as with the Vega box?

by JD

• 7 years ago

1 answer

View Answer

What is the overall difference of measurements and what not of the 28-32 and 33-34 cross-steer kits/racks? Thanks

by Essex

• 7 years ago

1 answer

View Answer

Can I get a longer rack for this because the turn radius is to wide?

by Rags

• 8 years ago

2 answers

View Answers

Which steering arms go with the: Unisteer 1928-32 Ford Cross-Steer Rack and Pinion, Speedway Forged 4 Inch Drop I-Beam Front Axle, Chrome, Drilled, Speedway 1928-1948 Ford Chrome Spindles w/ King Pins Installed What else would I need?

by Mike

• 8 years ago

1 answer

View Answer

Starting a new build, using the 91657045 chassis, front suspension 91639517 and 9133948 steering and break kit. Will this unitsteer work with the aforementioned? What other parts do I need to make this work? Thanks

by Big K

• 8 years ago

2 answers

View Answers

Im building a 32 5 window with a 6"spring behind will this work? I see that it will with 4", but I have a 6"

by Lonnie

• 9 years ago

1 answer

View Answer

Will this unit work on a 1930 Model A pickup with Ford f1 steering box with traverse spring over I beam? Will it improve my steering because it steers like a truck. Thanks

by Max

• 10 years ago

1 answer

View Answer

I have this unit installed on my 31 Ford coupe but my steering wheel is not centered in the car. How to I correct this with the rack?

by Rick

• 10 years ago

1 answer

View Answer

Load More Questions

10 of 30 questions shown

Fitment

1932 Ford 1/2 Ton Pickup

1932 Ford Model 18

1928-1931 Ford Model A

1932 Ford Model B

1928-1932 Ford Sedan Delivery