UniSteer 8011960-01 Rack and Pinion

Rack and Pinion - Power - 1966-67 Fairlane - 289-351W

• This kit uses a rear steer center take off rack & pinion mounted to a solid one piece bracket which bolts up to the frame using the original holes for the steering box and Idler Arm.
• This kit is specific to Fairlane's only
• not for other model Fords of the same year. This kit works with Small Block Motors only.
• Installs have been done on vehicles with the 289 & 302 motors in them.
• Stock manifolds should work
• otherwise use Hooker Long Tube or Competition Headers. Other headers may work
• but may require modification.
• Two sets of outers are included to match either sized taper found on the steering arms of these cars.
• Note: This kit will not work with the factory column shifter
• but it will work with an aftermarket column shifter.

Give your later model Fairlane a steering overhaul! Swap out the steering box and linkage for Unisteer’s bolt on rack & pinion kit. You’ll not only be cruising in style, but cruising with the comfort of modern power steering, improved road feel and handling without being oversensitive.