The rack comes mounted to a one piece mounting bracket which replaces the tubular cross member located directly behind the front suspension.
Since the racks are center take-off style
we off set the rack on the mounting bracket; moving the pinions closer to the driver-side frame which makes connection of the steering linkage to a column as easy as possible.
From a steering standpoint
we found that the early Mustangs split mid 1967 and there were slight differences
so make sure you order the correct kit!
Additionally
later model Mustangs and Cougars may look the same
but are NOT - check out our Cougar Rack & Pinion Kits.
The kit will work on Small Block cars with the Factory Air Conditioners
and have been successfully used with Stock Manifolds
and Hooker Super Comp Headers. Other Headers may work
but we can't guarantee an easy install.
This kit requires the use of a mini starter. This kit may require some modifications on Mustangs with Dart Heads and other Aftermarket Heads requiring different headers.
Note: If you have a 351C motor you will need to use Headman headers.

Our early Mustang Rack Kit greatly improves the steering and handling when compared to that old steering box. This is a center take-off style rack and pinion that utilizes an offset ball center bar which duplicates the stock center link; this means that the rack matches the exact geometry of the original front suspension. Effectively eliminating bump steer, and creating great handling.

CA WARNING:

Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov

UniSteer 8011810-01 Specifications

KEY SPECS
MFG. Part #	8011810-01
Brand	UniSteer

Ratings & Reviews

Be the first to write a review.

Questions & Answers

Be the first to ask a question.

Fitment

1967-1970 Ford Mustang