UniSteer 8011430 Rack and Pinion, Power, 1957-59 Ford, 289-351W

Rack and Pinion - Power - 1957-59 Ford - 289-351W

• This is a rear steer center take-off style rack and pinion with a ball center bar that exactly matches the center link of the stock suspension for the '57-'59 Fords.
• The rack & pinion comes mounted to a one piece mounting bracket that bolts up to the frame using the same holes that held the steering box and idler arm.
• This kit is designed for use with Windsor Small Block Motors
• the 289
• 302
• and 351.
• This kit has been installed on vehicles with stock manifolds. Other Headers may work
• but might require modification or another u-joint in the column linnkage.
• Note: This kit will not work with the factory column shifter
• but it will work with an aftermarket column shifter.

Time to upgrade your classic Ford’s steering. Do it with Unisteer’s bolt in rack & pinion system for a superior steering experience! Engineered to match the stock suspension of these classic cars! Sorry it will not work on Trucks.