|
#1852216B
UMI 2216-B 82-92 F-Body Tunnel Mounted Torque Arm TH350&T5, Black
$499.99
/kit
Factory Shipped
Quantity
Need Help? Call to Order
Add to a list
Share
Select an engine to verify Fitment
Select Engine
|
#1852216B
$499.99
/kit
Factory Shipped
Quantity
Need Help? Call to Order
Add to a list
Select an engine to verify Fitment
Select Engine
Need help?
855.313.9176Quick and Easy Returns
Return PolicyThis tunnel mounted torque arm is designed to work with factory 700R4 automatic transmission and manual T5 5-speed transmission. This item is supplied with a new transmission crossmember with provisions to work with both the 700R4 and T5 transmission. Set-up requires no modifications and is a 100% bolt in design.
This torque arm set-up is designed to remove the front mounting point of the torque arm off the transmission, protecting the tail shaft from damage. This torque arm is supplied with pivot brackets that allow (2) settings to allow easy instant center adjustments. By simply moving the torque arm into the next location you can automatically change the instant center point of the vehicle. This is very crucial on low to mid horse-power cars and can easily lower 60-foot times. This set-up bolts to existing floor pan holes using 0.188" thick mild steel CNC machined mounting plates and metric grade 10.9 hardware. The complete cross brace is constructed of 0.120" thick rectangular tubing and attaches to the torque arm using 0.250" thick mild steel mounting pivot plates with Grade 8 hardware. The torque arm is attached to the supplied cross brace using an Energy Suspension polyurethane bushing set-up on both the supplied cross brace and torque arm. Polyurethane was chosen as a mounting point to keep road noise at a minimum and eliminate unwanted "clunks" found with other set-ups available. The grease-able polyurethane bushings absorb road irregularities and protect noise from entering the passenger compartment. The rear mounting points feature 0.375" thick CNC machined mounting plates and are appropriately drilled to fit your stock rear as well as aftermarket 12-Bolt and 9" Rear-end housings. This set-up requires no welding or drilling and can be installed with basic hand tools; this is a complete bolt-in design!
Torque Arm Benefits:
Features:
Charts
WARNING:
Cancer and Reproductive Harm – www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 2216-B |
| Brand | UMI Performance |
| Material Type | Steel |
| Finish | Powder Coated |
| GENERAL | |
| Transmission Mount Included | No |
| Sold in Quantity | Kit |
Be the first to ask a question.
1976-1986 Chevy C10
Gen 1 LG3 Small Block Chevy
1976-1982 Chevy C10 Suburban
Gen 1 LG3 Small Block Chevy
1977-1982 Chevy C20
Gen 1 LG3 Small Block Chevy
1976-1978 Chevy C20 Suburban
Gen 1 LG3 Small Block Chevy
1978-1979 Chevy C30
Gen 1 LG3 Small Block Chevy
1976-1982 Chevy Camaro
Gen 1 LG3 Small Block Chevy
1977 Chevy Caprice
Gen 1 LG3 Small Block Chevy
1980 Chevy Corvette
Gen 1 LG3 Small Block Chevy
1976-1982 Chevy El Camino
Gen 1 LG3 Small Block Chevy
1977-1982 Chevy G10
Gen 1 LG3 Small Block Chevy
1977-1982 Chevy G20
Gen 1 LG3 Small Block Chevy
1978-1979 Chevy G30
Gen 1 LG3 Small Block Chevy
1982 Chevy G30
Gen 1 LG3 Small Block Chevy
1977-1982 Chevy Impala
Gen 1 LG3 Small Block Chevy
1977-1979 Chevy K10
Gen 1 LG3 Small Block Chevy
1981-1982 Chevy K10
Gen 1 LG3 Small Block Chevy
1976-1982 Chevy K10 Suburban
Gen 1 LG3 Small Block Chevy
1977-1978 Chevy K20
Gen 1 LG3 Small Block Chevy
1980 Chevy K20
Gen 1 LG3 Small Block Chevy
1977-1978 Chevy K20 Suburban
Gen 1 LG3 Small Block Chevy
1977-1981 Chevy K5 Blazer
Gen 1 LG3 Small Block Chevy
1976 Chevy Laguna
Gen 1 LG3 Small Block Chevy
1976-1982 Chevy Malibu
Gen 1 LG3 Small Block Chevy
1976-1977 Chevy Monte Carlo
Gen 1 LG3 Small Block Chevy
1976-1979 Chevy Monza
Gen 1 LG3 Small Block Chevy
1976-1979 Chevy Nova
Gen 1 LG3 Small Block Chevy