Trans Oil Cooler Line Install Kit, -6AN to 1/4 Inch, 12 ft. Hose

Kit Includes

(1) Earls 167210ERL Hose & Tubing Separator, 5/8 Inch, Set of 2, Polished

(1) ICT Billet 551114 Transmission Adapter Fitting, -6AN to 1/4 Inch

(2) Black 90 Degree Socketless Push-On Hose End Fitting, -6 AN

(4) Black Socketless Straight Push-On Hose End Fitting, -6 AN

(2) Black 45 Degree Socketless Push-On Hose End, -6 AN

(2) Aeroquip Special Application Socketless -6 AN Hose, Black, 6Ft Length

Socketless -6AN Hose

• Textile braid reinforcement
• Low pressure design for use with socketless reuseable fittings only
• No hose clamp necessary
• Ideal hose for fuel line applications

Construction: AQP elastomer tube, textile braid reinforcement, black AQP elastomer cover.

Application: For gasoline, fuel and lubricating oils, air and water. Not recommended for hydraulic impulse applications and is not approved for air brake, hydraulic brake or power steering applications.

Operating Range: Max Operating pressure: 250 PSI. Minimum burst pressure: 1000 PSI. Operating Temperature Range -40°F to 300°F. Air not to exceed +250°F and water not to exceed +180°F. Reduced pressure operation allows for temperatures up to 300°F.

Hose Adapter Set

GM Transmission Line, AN Hose Adapter Set 

• Fits: Up to 2007 both front & rear (top & bottom) GM trans case holes (4L80E rear fitting, see other listing)
• Thread Pitch: -6AN to 1/4" NPSM (thread O.D. measures .516", standard GM transmission case thread)
• Package Includes: 2 fittings and 2 orings
• Fits: TH350, TH400, 4L60E, 4L80E, 700R4, 200-4R and Ford AOD transmissions 4R100, 4R70W, C5
• Made in Wichita, Kansas from aerospace grade, USA produced, billet aluminum 
• Fits female NPSM Threads

Tubing Separator

Earl's is proud to offer the state-of-the-art in plumbing hardware for professionals and serious enthusiasts. Crafted from 6061-T6 billet aluminum alloy, these clamps are the finest available to finish off a professional plumbing installation. For separating, isolating, and securing fuel lines, brake lines, & brake hoses. Earl's has the wides selection available to finish off your engine compartment.

• State-Of-The-Art
• Widest Selection Available
• For Serious Enthusiasts
• Billet Aluminum Alloy
• Professional Plumbing Installation
• For Professional Engine Look

-6 AN Hose Fittings

Black socketless push-on hose end fittings will give your engine compartment the look you are after. For use with 37 degree flared ends.

• -6 AN female to push-on hose barb adapter
• Lightweight aluminum hose ends are completely reusable, and interchangeable
• 37° angled sealing surface guarantees a positive anti-leak seal
• Available in a Black anodized finish

Socketless Push-On Hose Ends Application Chart (GIF)