Tekton WSA04222 9 Inch Adjustable Wrench (1-1/2 in. Jaw Capacity)

9 Inch Adjustable Wrench (1-1/2 in. Jaw Capacity)

The Tekton 9 Inch Wide-Jaw Adjustable Wrench features a 0 to 1-1/2 inch (0 to 38 mm) jaw capacity with high-contrast, laser-engraved inch and metric scales. The low-pitch angle and tight fit between the gear and the teeth prevent the jaw from sliding open during use and allow for smoother, more precise adjustments. The integrated 3/8 inch drive at the end of the handle enables the use of a ratchet or breaker bar to increase leverage and access. Using an additional tool to increase leverage increases the risk of damage to the fastener or the wrench. To reduce the working swing arc in tight spaces, the open end is angled 22.5 degrees so the wrench can be flipped over with each rotation to engage the fastener twice as often. The back half of the handle is thicker for a more comfortable grip and better control. Our adjustable wrench is made of 6140 chromium-vanadium steel with a zinc phosphate coating for corrosion resistance. The head of the wrench is ground smooth and has a lightly oiled surface.

• 1-1/2 Inch Jaw Capacity – The adjustable wrench features a 0 to 1-1/2 inch (0 to 38 mm) jaw capacity with high contrast laser-engraved scales
• Smooth, Low-Pitched Worm Gear – The low-pitch angle and tight fit between the gear and the teeth prevent the jaw from sliding open during use and allows for smoother, more precise adjustments
• 3/8 Inch Square Drive – The integrated 3/8 inch drive at the end of the handle enables the use of a ratchet or breaker bar to increase leverage and access
• 22.5-Degree Offset Angle – To reduce the working swing arc in tight spaces, the open end is angled 22.5 degrees so the wrench can be flipped over with each rotation to engage the fastener twice as often
• Materials and Finish – Made of 6140 chromium-vanadium steel with a zinc phosphate coating for corrosion resistance, the head of the wrench is ground smooth and has a lightly oiled surface