Tekton SKT25302 83-Piece 1/2 In. Drive Socket/Ratchet Set W/Case

Narrowed diameter stretches to the base of the socket on small, deep-length sizes. This provides greater reach into tight, recessed areas. Provides an exact fit and maximum contact for hex fasteners. Radiused corners prevent fastener round-off by applying force to a fastener’s flat sides, rather than its corners. Detent grooves and beveled edges provide a smooth and secure connection with the drive tool. Meets minimum value of 1.2 times the ANSI standard for Proof Torque. Verified by a single-cycle test that applies torque until specified value is reached without failure or permanent deformation. Reach past obstructions and into tight spaces. Knurled band provides grip for starting or turning loosened fasteners. Pin-style joints rotate smoothly and continuously to access fasteners at up to 55-degree angles.

• Permanently impressed into the material by a roll-stamp die
• As large as possible while still being readable along the socket's curved surface
• Clearly visible size numbers with extra-deep outline
• Chrome-plated exterior is highly corrosion resistant and wipes clean to a mirror finish
• Interior is protected against rust with clear coat, rather than commonly-used metallic paint
• 4-degree swing arc
• Ultra-compact head is reduced in all dimensions
• Quick-release drive locks sockets onto tang and releases with the press of a button
• 230-degree pivoting head without preset positions
• 18 inch long handle for increased leverage
• High-density polyethylene material withstands common lubricants, fuels, and solvents
• Carrying handle, strong latches, and metal hinge pins
• Molded size markings for each tool and a deep parts tray

Set Includes:

IN Standard length

3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1, 1-1/16, 1-1/8, 1-3/16, 1-1/4, 1-5/16 in. (16 sizes)

IN Deep length

3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1, 1-1/16, 1-1/8, 1-3/16, 1-1/4, 1-5/16 in. (16 sizes)

MM Standard length

10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32 mm (23 sizes)

MM Deep length

10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32 mm (23 sizes)

Universal joint

3 inch extension

10 inch extension

90-tooth ratchet

Breaker bar

Storage case

41.1 lb