Tekton SKT05303 56 Piece 1/4 In. Drive Socket/Ratchet Set W/ Case

Narrowed diameter stretches to the base of the socket on small, deep-length sizes. This provides greater reach into tight, recessed areas. Provides an exact fit and maximum contact for hex fasteners. Radiused corners prevent fastener round-off by applying force to a fastener’s flat sides, rather than its corners. Detent grooves and beveled edges provide a smooth and secure connection with the drive tool. Meets minimum value of 1.2 times the ANSI standard for Proof Torque. Verified by a single-cycle test that applies torque until specified value is reached without failure or permanent deformation. Reach past obstructions and into tight, narrow spaces. Reach around obstructions and access fasteners at an angle. Attach sockets to the spinner handle and use it like a nut driver.

• Permanently impressed into the material by a roll-stamp die
• As large as possible while still being readable along the socket's curved surface
• Clearly visible size numbers with extra-deep outline
• Chrome-plated exterior is highly corrosion resistant and wipes clean to a mirror finish
• Interior is protected against rust with clear coat, rather than commonly-used metallic paint
• 4-degree swing arc
• Ultra-compact head is reduced in all dimensions
• Quick-release drive locks sockets onto tang and releases with the press of a button
• Resilient high-density polyethylene material withstands exposure to common lubricants, fuels, and solvents
• Strong latches and metal hinge pins
• Molded size markings for each tool inside the case

Set Includes:

IN Standard length

5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16 in. (11 sizes)

IN Deep length

5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16 in. (11 sizes)

MM Standard length

4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 mm (14 sizes)

MM Deep length

4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 mm (14 sizes)

Universal joint

3 inch extension

6 inch extension

Magnetic hex bit holder

Spinner handle

90-tooth ratchet

Storage case

4.67 lb