Tekton SIF92400 6 Piece 1/2 In. Drive Impact Socket Set W/Case

Get 10 common socket sizes needed for servicing cars, trucks, utility trailers, and more. The Tekton flip socket is both longer and has lower stepped shoulders than competitors to give you maximum reach into lug nut wells. The outer diameter is 1 to 2 mm smaller than other Tekton impact sockets, allowing for better access in tight lug nut wells. The radiused corners prevent fastener round-off by applying force to the flat sides of a lug nut, rather than its corners. The steep 60° chamfered opening makes it easy for the flip socket to slide over lug nuts. Each socket well is extra deep to provide increased engagement with lug nuts and clearance for decorative caps. The size is marked in two ways on every socket—both as a high-visibility laser marking and a permanent stamped marking.

• Each flip socket size meets a minimum of 1.3 times the ANSI/ASME standard for proof torque
• The flip sockets are made from 4140 Chromium-Molybdenum steel
• The 3-inch extension is made from 6140 Chromium-Vanadium steel
• All pieces have a corrosion-resistant manganese phosphate coating
• The included 3-inch extension works for both types of anvils found on 1/2 inch drive impact wrenches
• The high-density polyethylene case withstands common lubricants, fuels, and solvents

Set Includes:

IN 3/4 x 13/16 in.

IN 7/8 x 15/16 in.

IN 1 x 1-1/16 in.

MM 17 x 19 mm

MM 21 x 22 mm

3 inch extension

Storage case

3.3 lb