Tekton KLX99301 Ball End and Flat End Hex L-Key Set, 43-Piece

Ball End and Flat End Hex L-Key Set with Holders and Racks, 43-Piece (0.050-3/4 in., 1.3-19 mm)

The 43-Piece Ball End and Flat End Hex L-Key Set includes 1.3–10 mm and 0.050–3.8 in. ball end L-keys, 11–19 mm and 7/16– 3/4 in. flat end L-keys, two hex key holders, and two hex key racks. The ball end keys are made from 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC and the flat end keys are made from 6150 chromium vanadium steel that's heat-treated to 44–50 HRC. All of the keys are coated with a durable manganese phosphate finish that's resistant to corrosion. With the exception of the smallest sizes, Tekton L-keys are marked in two ways—both with a high-visibility laser marking and a stamped marking (the 1.3 mm L-key is too small to laser mark and the 1.3, 1.5, and 2 mm keys are too small to stamp). The durable hex key holder has self-aligning key slots that allow keys to be removed and inserted without moving others out of the way, and the steel hex key rack has hex-shaped slots that allow larger keys to be taken in and out without resistance.

• High Leverage – We designed these L-keys to be longer in the largest sizes to increase leverage where it matters
• Tight Tolerances – We measure our hex key tolerances in two ways, from point-to-point and side-to-side, to ensure the highest standards of dimensional accuracy and consistency
• Corrosion-Resistant – We coat all of our keys with a durable manganese phosphate finish that's resistant to corrosion Clear Markings – With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways: with a high-visibility laser marking and a stamped marking (0.050 inch and 1.3 mm are too small to laser mark and 0.050 inch, 1/16 inch, 5/64 inch, 1.3 mm, 1.5 mm, and 2 mm are too small to stamp)
• Quick-Access Racks – The included racks have hex-shaped slots that make it easy to take the large L-keys in and out without resistance
• Low-Profile Holders – The included holders organize the ball end hex L-keys facing forward so you can easily access each tool without having to move others out of the way; you can also face the L-keys to the side for a flat, low-profile organization solution
• 13-pc. ball end hex keys: 0.050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8 in.
• 6-pc. flat end hex keys: 7/16, 1/2, 9/16, 5/8, 11/16, 3/4 in.
• 15-pc. ball end hex keys: 1.3, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10 mm
• 9-pc. flat end hex keys: 11, 12, 13, 14, 15, 16, 17, 18, 19 mm
• 13-tool black hex key holder
• 6-tool hex L-key rack with label sheet
• 15-tool red hex key holder
• 9-tool hex L-key rack with label sheet