Tanks TM6372-HT 63-72 Chevy Truck Frame Mount Gas Tank, Bed Fill

#910851156

Tanks TM6372-HT 63-72 Chevy Truck Frame Mount Gas Tank, Bed Fill

1963-72 Chevy and GMC Pickup Under Bed Frame Mount Gas Tank
2" ID Connection Hose
Die Stamped Galvanized Steel then Powder Coated Silver

$335.99

/each

Factory Shipped

Quantity

Need Help? Call to Order

Add to a list

Select a vehicle to verify Fitment

Select Vehicle

Product Summary

63-67 Chevy, EFI Conversion Fuel Tank Style, Steel

1963-72 Chevy and GMC Pickup Under Bed Frame Mount Gas Tank
2" ID Connection Hose
Die Stamped Galvanized Steel then Powder Coated Silver
Fuel Injection Ready!
Utilizes our GPA series fuel pumps, available in sizes from 109 to 450 liters per hour.

See more details

Key Specs

Fuel Tank Style	EFI Conversion
Fuel System Type	EFI
Capacity	18 gallons
Material Type	Steel
Finish	Powder Coated

See more specs

Need To Know

Need help?

855.313.9176

View the Help Center

Quick and Easy Returns

Return Policy

Tanks TM6372-HT Details

This tank mounts under the truck bed using the flanges to bolt in place. The tank is designed to bolt up to the bottom side of the frame rails but it can be mounted in different configurations including on top or even in-between the rails in some cases. It is up to the installer to drill and locate the mounting holes. Mounting hardware not included.

1963-72 Chevy and GMC Pickup Under Bed Frame Mount Gas Tank
Available with 2" ID Connection Hose
Die Stamped Galvanized Steel then Powder Coated Silver
Fuel Injection Ready!
Utilizes our GPA series fuel pumps, available in sizes from 109 to 450 liters per hour.
Uses aftermarket 5-bolt senders. Multiple Ohm ranges available to work with factory or aftermarket gauges. If using tube sender or reed sender, length is 9".
EFI style internal baffling with extra large 4.8 liter dual tube baffled fuel tray to prevent fuel pump starvation.
If using on a carbureted application use part# PTA-G
18 Gallon Capacity
Size is 32-1/4" x 20-1/2" x 9-3/4" (including the mounting flange)
Size is 28" x 20-1/2" x 9-3/4" (measured without the mounting flange)

Warranty Information

Speedway Motors cannot facilitate the return of defective Tanks Inc.’s products as they have requested to handle these directly with the consumer. For defective product support and Return Authorization, please contact Tanks Inc. at (319) 465-3522 or (877)

CARB Warning

For race/ off road use only

Emissions warning: this part only legal for sale or use in California for racing (competition) vehicles which may never be used, registered, or licensed for use upon a public highway. Any other use renders the vehicle tampered and not legal for use on California public highways (any public street or roadway, public dirt road, public park, or publicly maintained right of way open to the use of the public for vehicular travel). Violations subject to $37,500 penalty per violation per vehicle, revocation of registration, loss of use on California public right of ways, and proof of correction for tampering. There are similar restrictions and penalties under federal law and the laws of all other states with penalties under federal law of up to approximately $45,268 per tampered vehicle and/or engine.

CA WARNING:

Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov

CARB warning

Tanks TM6372-HT Specifications

KEY SPECS
MFG. Part #	TM6372-HT
Brand	Tanks
Fuel Tank Style	EFI Conversion
Fuel System Type	EFI
Capacity	18 gallons
Material Type	Steel
Finish	Powder Coated
Color	Silver
Sending Unit Included	No
Fuel Pump Included	No
Tank Straps Included	No
Overall Length	32.25"
Overall Width	20.5"
Overall Height	9.75"

GENERAL
Fuel Type	Gasoline
Baffled	Yes
Filler Neck Included	No

Ratings & Reviews

Be the first to write a review.

Questions & Answers

Be the first to ask a question.

Fitment

1963-1967 Chevy C10 Panel

1967 Chevy C20 Panel

1963-1966 Chevy C30 Panel