This fuel tank sender mounts with five mounting screws. It is adjustable to work on fuel tanks from 6 to 24 inches deep by cutting to length using the instructions included. Since fuel tank senders only read resistance to ground they work on all 6-24 volt systems positive or negative ground. They do not have a fuel pickup tube built into them as some original senders may have. Made with a high quality ceramic board rheostat. Our fuel senders are available for the following applications.

Application Listing:

SW - SW gauges - 240-33 Ohms
VDO - VDO gauges - 10-180 Ohms
GME - GM up to 1964 - 0-30 Ohms
GML - GM 1965 and up - 0-90 Ohms
ORG - Early Ford and Mopar - 73-10 Ohms
FDL - Ford 1987 and up - 16-158

The first number of the (Ohms) represents empty and the following is for full.

Warranty Information

Click for details

Speedway Motors cannot facilitate the return of defective Tanks Inc.’s products as they have requested to handle these directly with the consumer. For defective product support and Return Authorization, please contact Tanks Inc. at (319) 465-3522 or (877)

CA Prop 65

Tanks TAN-SW Specifications

KEY SPECS
MFG. Part #	TAN-SW
Brand	Tanks
Overall Length	24"
Ohm Range	240 ohms empty, 33 ohms full
Height Adjustable	Yes

GENERAL
Bolt Hole Pattern	SAE 5 hole (2.125 in. bolt circle)
Sold in Quantity	Each

Ratings & Reviews

Be the first to write a review.

Questions & Answers

Be the first to ask a question.