Tanks GPA-4 In-Tank Fuel Pump Module, GPA Series, 100 Psi

The GPA-Series Fuel Pump Module is designed to be used in many die-stamped alloy-coated and stainless steel gas tanks that have factory-installed reservoir trays. The tray is an absolute necessity for fuel-injection in order to prevent fuel starvation when accelerating and cornering.

The internal wiring harness, supply line, return line, filter sock and insulator sleeve are included. (The gasket and screws with o-rings are not included with the pump because they include gaskets and screws with our tanks.)

The heavy 10-gauge no-warp mounting plate contains fittings for the supply, the return, the vent and the electrical connector.  It is yellow-zinc plated to prevent corrosion.

• Made in the USA
• Heavy 10 gauge no-warp mounting plate
• 1/4" NPT Supply and Return Line
• Barbed Vent Fitting
• Oven brazed fittings
• Up to 100 PSI
• In-tank wire harness
• Genuine Walbro Fuel Pump - 255 Liters Per Hour up to 650 hp
• Ideal for the GM LS fuel injection application for 58+ psi is required
• Works with tanks up to 11" deep
• Can be shortened to work in tanks with a minimum of 6"