Tall Model T Cowl-Tail Lights - Chrome

Yes

Very cool looking

Very nice product

The glass lens Hass to be glued to the outer frame and the light holder that holds it in doesn't press up against the lens there's a little bit of gap in there other than that these lights are beautiful and I would put by them for other projects

yes

haven,t mounted them yet

Yes I would recommend this item

They are as close to original as you can get

Chrome or Black?

I bought 4 of these lamps, 2 chrome and 2 black. I used the chrome as reat taillights, blinkers & hazards, very good. The chrome look stunning against the metallic blue paint. I had the black ones in the front and painted them the same blue as the car, doing the same functions. They also looking stunning and the paint shop said there was no problem painting them. The only down side, is you have to pull the light apart to change the bulb and you have to silicone the lens'. They get "awesome" & "cool", etc comments from people. I am very pleased how they look and work on my bucket. I have a 26, and the time frame for these lights works perfect on any Model T.

Love the finish

I purchased 2 with red lens and 2 with amber lens. They look great. the fit is nice. Great product.

There okay but....

The light is nice you need to somehow hold the rflector in...biggest issue is the wat the chimmney and the bottom pot fit...the both have a very large gap between them and the main body...I will machine up a curved spacer to eliminate this...the picture of the light on the product page makes it look like the gap is not there but it is...not the best prduct I have gotten the smaller 7 1/2 ones are nicer

Needs a manufacturing update.

The reflector plate which fits inside of light was machined too large to fit inside of housing. I had to grind the entire outer edge down to a point where the plate would slip inside of housing. The plate is chromed and possibly the diameter of the plate was measured before the chroming process instead of afterwards. A new product should fit together without modification by the consumer. Other than that, this is a nice looking product.

ok

The chrome finish is nice except for the light scratches. There were no components to hold the lens tight inside the housing, had to make my own. The Bezels did not fit the body, had to bend the body to fit the bezel.