|
#91032292-PLN
Sweet U-Joint, 3/4" Round Weld-on To 3/4 DD
- Features needle bearing u-joints
- They have full compliment bearings
- Made of the highest quality for racing
$89.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Product Summary
Universal Fit, Single Joint Universal Joint Style
- Features needle bearing u-joints
- They have full compliment bearings
- Made of the highest quality for racing
- Features Forged Vanadium steel yokes and u-joint
- There is a 3/4" round on one end and a 3/4" DD on the other. The DD end features a set screw and a lock nut
Key Specs
| MFG. Part # | 401-50619 |
| Universal Joint Style | Single Joint |
| End #1 | 3/4" DD |
| End #2 | 3/4" Round |
| Spline Count | No splines |
Need To Know
Need help?
855.313.9176Quick and Easy Returns
Return PolicySweet Manufacturing 401-50619 Details
Sweet Manufacturing 401-50619 Details
Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints have a 3/4 round weld-on end.
- Full compliment bearings
- Forged Vanadium steel yokes and u-joint
- Highest quality for racing
- Features needle bearing u-joints
- U-Joint=3.875" L x 1.375" D
- The DD end features a set screw and a lock nut
Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.
Application
STEP 1
Be sure to measure the diameter of the shaft and count the number of splines on the shaft. Some shafts have a blank spot ground on one side. To get the correct number of splines, use a flat edge and cover the blank half of the shaft through the diameter and count the splines on the other half. Multiply that number by 2, thus giving you the total number of splines on the full circumference of the shaft.
STEP 2
Choose which shaft type best suits your application: 3/4" weld on, 3/4" DD or 1" DD.
STEP 3
With these two pieces of information at hand, refer to our chart to find the appropriate part number of the u-joint for your specific application.
Guides & Documents
Sweet Manufacturing 401-50619 Specifications
Sweet Manufacturing 401-50619 Specifications
| KEY SPECS | |
|---|---|
| MFG. Part # | 401-50619 |
| Brand | Sweet Manufacturing |
| Universal Joint Style | Single Joint |
| End #1 | 3/4" DD |
| End #2 | 3/4" Round |
| Spline Count | No splines |
| GENERAL | |
| Spline End | No Splines |
| Overall Length | 3.875" |
| Outside Diameter | 1.355" |
| Max Operating Angle | 30 ° |
| Set Screw Included | No |
| Material Type | Steel |
| Finish | Oxide |
| Color | Black |
| Sold in Quantity | Each |
Ratings & Reviews
4.9
47 Reviews
Customers praise the product for its reliable, high-quality construction and practical usability. Being light-weight, durable, compact, and having a sleek appearance are top features. Its use in improving steering columns in classic and homebuilt cars and hot rods is highly recommended. It is praised as easy to install, great for tight spaces, and for being a good value for money. Comments highlight the product's superiority in strength and compatibility with varying car models compared to other brands. It's valued as 'American-made' and for being a resilient, long-lasting component in steering systems. Its key benefits include being rebuildable and having a solid, compact design. However, some customers note there's room for slight improvement in terms of fit with some steel rods. Despite this, the product's qualities make it preferable over competitors.
Ratings & Reviews
4.9
47 Reviews
Customers praise the product for its reliable, high-quality construction and practical usability. Being light-weight, durable, compact, and having a sleek appearance are top features. Its use in improving steering columns in classic and homebuilt cars and hot rods is highly recommended. It is praised as easy to install, great for tight spaces, and for being a good value for money. Comments highlight the product's superiority in strength and compatibility with varying car models compared to other brands. It's valued as 'American-made' and for being a resilient, long-lasting component in steering systems. Its key benefits include being rebuildable and having a solid, compact design. However, some customers note there's room for slight improvement in terms of fit with some steel rods. Despite this, the product's qualities make it preferable over competitors.
4.9
47 reviews
5
42
4
4
3
1
2
0
1
0
Most Liked Positive Review
4.0
Nice and compact
The U-Joint is small enough to fit in tight places. The 3/4" round end might be a little loose with some steel rods. I have 3/4" round rods that are not exactly the same size. Some fit snugly while others are a little loose. However this is the "weld-on" end so that is of no concern. The DD hole fits well with a rod that I had on hand but is looser than I'd like with the Speedway DD rod. Since this end will be secured with a screw, you may want to look through a few DD rods of have them machined. I just made my own. I would buy another one without hesitation. In fact I will need another one with DD ends on both sides as soon as I get the geometry figured out.
Most Liked Negative Review
3.0
Yes will buy this product again for sure
used on my steering shaft on a 57 chevy
Filter by Ratings
I would bye this product again
5.0
a year ago
Nels
Cadyville ny
Verified
Used it on my steering rod ,worked out great,
Would Recommend
u-joint
5.0
2 years ago
Joe
Santa Rosa
Verified
they do what they were designed to do.
Would Recommend
Very pleased with product.
5.0
2 years ago
Blueberry
USA
Verified
Sweet joints are my favorite. Light weight, strong, rebuildable, small and clean looking. Great value!
Would Recommend
I would buy this product again
5.0
3 years ago
pops
New Jersey
Verified
used for steering on my 1937 chevy coupe
Would Recommend
Yes will buy this product again for sure
3.0
4 years ago
jimbowie
Wisconsin
Verified
used on my steering shaft on a 57 chevy
Would Recommend
Nice quality u joint
5.0
4 years ago
Stevo
Carlsbad nm
Verified
Steering column for Chevy ll
Would Recommend
Yes I would
5.0
5 years ago
Larry l
Titusville, fl
Verified
Used on homebuilt hot rod
Would Recommend
Quality parts based off handling and mock up.
5.0
5 years ago
Darin
Green Bay
Verified
Solid design, beefy and compact.
Would Recommend
yes
5.0
5 years ago
none
waynesboro,va
Verified
Reroute the steering on gasser build
Would Recommend
Exactly as expected
5.0
5 years ago
Big Jim
McHenry Illinois
Verified
Good value
Would Recommend
Showing 10 of 47 reviews