|
#91032239
$58.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Universal Fit, Single Joint Universal Joint Style
| MFG. Part # | 401-50611 |
| Universal Joint Style | Single Joint |
| End #1 | 3/4" Round |
| End #2 | 13/16"-36 Spline |
| Spline Count | 36 |
Need help?
855.313.9176Quick and Easy Returns
Return PolicyDont jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints have a 3/4" round weld-on end.
Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1". DO NOT interchange these u-joints.
Application
STEP 1
Be sure to measure the diameter of the shaft and count the number of splines on the shaft. Some shafts have a blank spot ground on one side. To get the correct number of splines, use a flat edge and cover the blank half of the shaft through the diameter and count the splines on the other half. Multiply that number by 2, thus giving you the total number of splines on the full circumference of the shaft.
STEP 2
Choose which shaft type best suits your application: 3/4" weld on, 3/4" DD or 1" DD.
STEP 3
With these two pieces of information at hand, refer to our chart to find the appropriate part number of the ujoint for your specific application.
Guides & Documents
| KEY SPECS | |
|---|---|
| MFG. Part # | 401-50611 |
| Brand | Sweet Manufacturing |
| Universal Joint Style | Single Joint |
| End #1 | 3/4" Round |
| End #2 | 13/16"-36 Spline |
| Spline Count | 36 |
| GENERAL | |
| Spline End | 13/16"-36 |
| Overall Length | 3.75" |
| Outside Diameter | 1.355" |
| Max Operating Angle | 30 ° |
| Set Screw Included | Yes |
| Material Type | Steel |
| Finish | Oxide |
| Color | Black |
| Sold in Quantity | Each |
4.7
17 Reviews
Customers commend the product for its quality and trustworthiness. They noted its practicality in applications such as steering shafts, race cars, and street rods, with its perfect fit and performance being particularly appreciated. The product's superior material quality, safety, and usability were consistent themes. Its tight tolerances and strong, non-wobbling fit received specific mention. Users also praised the successful implementation in their specific projects, like fig 8 derby cars and Saginaw steering conversions. Several customers acknowledged that while the product could be costly, they value its reliability and would repurchase, attesting to its superiority over competitors.
4.7
17 reviews
5
13
4
3
3
1
2
0
1
0
Most Liked Positive Review
5.0
Sweet steering u-joint
This is just what i needed to finish my Saginaw steering conversion. Sweet Mfg. is highly respected in the industry, especially the circle track car group. The product has very tight tolerances and is made in America. Speedway Motors experts answered my technical question thoroughly and shipped the item promptly once I placed the order.
Most Liked Negative Review
3.0
Still build the car
Still build the car
Filter by Ratings
Definitely
5.0
9 months ago
Farmer
Sheboygan wi
Verified
Easy installation
Would Recommend
Works great
5.0
2 years ago
Racerguy
Phoenix, Az
Verified
Used it on my 74 Nova stock car. Fit was perfect for the larger input shaft on the steering gear.
Would Recommend
Great product
5.0
3 years ago
Dave
Wa.state
Verified
It has sweet name on it has to be good. i trust them you can buy cheaper .but trust the best. Cant go wrong
Would Recommend
great product
5.0
3 years ago
bob
Fontana CA
Verified
used on the steering shaft
Would Recommend
Still build the car
3.0
4 years ago
Charlie
Ridgecrest, CA
Verified
Still build the car
Would Recommend
I will being again
5.0
5 years ago
Michael B
Carriere Ms
Verified
I could only fine my part at speedway.
Would Recommend
Steering help
4.0
6 years ago
grant52gmc
washington
Verified
steering joints were clearly labeled. Easy to find the ones i needed
Would Recommend
Steering parts
5.0
7 years ago
Fig 8 racer
Central Illinois
Verified
Used this for a fig 8 derby car. Works great.
Would Recommend
Quality piece
4.0
7 years ago
johnygman
Mandan, ND
Verified
I've used these on several projects on a variety of race cars all with success. Sweet makes quality stuff but it can get expensive--especially if you have several in a steering application.
Would Recommend
Yes very good
4.0
7 years ago
Chappy
Windyville mo
Verified
Worked great
Showing 10 of 17 reviews
4 Questions • 5 Answers
I measured .790 Which is about .022 smaller than 13/16". Will the 13/16" work or will it be too loose?
by Donnie
• 9 years ago
1 answer
View Answer
How do I measure the diameter of the shaft? My input shaft has a flat area on it, do I measure from the flat or do I measure the shaft fully round?
by Donnie
• 9 years ago
1 answer
View Answer
Will this work with a 1975 buick regal with a stock steering box?
by Hobby14s
• 10 years ago
1 answer
View Answer
Does this joint have set screws on either end?
by buck7940
• 11 years ago
2 answers
View Answers
4 of 4 questions shown
1971-1976 Buick Electra
1971-1976 Buick Estate Wagon
1971-1976 Buick LeSabre
1971-1976 Buick Riviera
1969-1976 Cadillac Calais
1969-1976 Cadillac DeVille
1969-1976 Cadillac Fleetwood
1976 Cadillac Seville
1971-1975 Chevy Bel Air
1971-1972 Chevy Brookwood
1971-1976 Chevy Caprice
1971-1976 Chevy Impala
1971-1972 Chevy Kingswood
1971-1976 Oldsmobile 98
1971-1976 Oldsmobile Delta 88
1971-1976 Pontiac Bonneville
1971-1976 Pontiac Catalina
1971-1975 Pontiac Grandville
