|
#91032298
$76.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Universal Fit, Single Joint Universal Joint Style
| MFG. Part # | 401-51919 |
| Universal Joint Style | Single Joint |
| End #1 | 3/4" DD |
| End #2 | 3/4" DD |
| Spline Count | No splines |
Need help?
855.313.9176Quick and Easy Returns
Return PolicyDont jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. This universal joint is 3.875 inches long and 1.375 inches in diameter.
Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.
Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1". DO NOT interchange these u-joints.
Length: 3.75" Width: 1.38"
Lock screws increase width to 1.564"
Application
STEP 1
Be sure to measure the diameter of the shaft and count the number of splines on the shaft. Some shafts have a blank spot ground on one side. To get the correct number of splines, use a flat edge and cover the blank half of the shaft through the diameter and count the splines on the other half. Multiply that number by 2, thus giving you the total number of splines on the full circumference of the shaft.
STEP 2
Choose which shaft type best suits your application: 3/4" weld on, 3/4" DD or 1" DD.
STEP 3
With these two pieces of information at hand, refer to our chart to find the appropriate part number of the u-joint for your specific application.
Guides & Documents
| KEY SPECS | |
|---|---|
| MFG. Part # | 401-51919 |
| Brand | Sweet Manufacturing |
| Universal Joint Style | Single Joint |
| End #1 | 3/4" DD |
| End #2 | 3/4" DD |
| Spline Count | No splines |
| GENERAL | |
| Spline End | No Splines |
| Overall Length | 3.75" |
| Outside Diameter | 1.35" |
| Max Operating Angle | 30 ° |
| Set Screw Included | Yes |
| Material Type | Steel |
| Finish | Oxide |
| Color | Black |
| Sold in Quantity | Each |
4.8
55 Reviews
Customers highly appreciate the product for its superior and consistent performance, specifically praising its compact and tight joints which fit well even in narrow frames. The product is recognized for its practicality in solving tricky steering jobs, with several customers admiring its role as a handy solution in their various projects. Customers testify that the product is well-built, dependable, and functions smoothly with no slop. The quality of material used is appreciated and the product is often described as durable, rock solid, and high-quality. Several customers note that they've tried other brands and products, and find our U-Joint to be the best, repeatedly stating that they would buy the product again, asserting its superior quality, fit, and practicality in comparison to other market offerings.
4.8
55 reviews
5
49
4
4
3
1
2
0
1
1
Most Liked Positive Review
5.0
Very well made double d steering joint
I purchased the double d steering joint for use on my 1953 Chevy 5 window pickup project. It fit perfectly on my original double d shaft and after I used my 4 & 1/2 inch grinder to make a double d slot on the original other round end of the shaft it fit perfectly. After tightening up the set screws applying locktite it's good to go:)
Most Liked Negative Review
1.0
Steering U joint
Sorry ,just being honest. Since it was a bit cheaper I bought it and found it be inferior ,did not swivel well, poor machining. Usually I Always buy Bergeson steering components steering is too critical to buy cheap.. Gene
Filter by Ratings
Yes
5.0
10 months ago
Professor
Auburn Maine
Verified
Steering gear
Would Recommend
Great Part
5.0
10 months ago
Trkguy
CA
Verified
I used this to connect a Mustang ll rack and a aftermarket GM style tilt steering column into a 1940 Ford. The part was impressive and well built with the right tolerances.
Would Recommend
Sweet Mfg steering u-joint
4.0
a year ago
The GAZZ
Alpine CA
Verified
These work great. High quality.
Would Recommend
The older one I had allowed more angle
3.0
a year ago
Greg
Iowa
Verified
This had less angle than the one it replaced
Would Recommend
Yes I would
5.0
a year ago
Hammer
Pine Bush NY
Verified
Fit perfect for my steering shaft on my 32 5 window coupe
Would Recommend
great
5.0
2 years ago
speedie
monterey
Verified
working on a rat rod
Would Recommend
Yes
5.0
2 years ago
32331 hemi
Roswell NM
Verified
As a steering joint
Would Recommend
working out good
4.0
3 years ago
Spike
kansas
Verified
Using on steering shaft .
Would Recommend
i would buy this product again
5.0
3 years ago
chip
houston tx.
Verified
worked well for my application
Would Recommend
Would buy again
5.0
3 years ago
TM
Tyler TX.
Verified
Compact and tight joints- just what is needed to put steering in a narrow frame 46 Chevy PU with SBC. Sweet makes great products.
Would Recommend
Showing 10 of 55 reviews
2 Questions • 5 Answers
On part nos 91032298 is there a set screw on both ends
by Wayne
• 7 years ago
4 answers
View Answers
What is the Max. angle that this joint should be used at?
by Fur Face
• 14 years ago
1 answer
View Answer
2 of 2 questions shown
