|
#91032278
$118.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Universal Fit, 3.18" Overall Diameter, 19 Spline Count
| MFG. Part # | 801-70004 |
| Brand | Sweet Manufacturing |
| Spline Count | 19 |
| Steering Wheel Style | Replacement |
| Material Type | Aluminum |
Need help?
855.313.9176Quick and Easy Returns
Return PolicyFrom Sweet Manufacturing come these quick release hubs for 3/4" steering shaft. Splined steel sleeve minimizes slop.
Hubs are available in your choice of steel (gold) or aluminum (red).
| KEY SPECS | |
|---|---|
| MFG. Part # | 801-70004 |
| Brand | Sweet Manufacturing |
| Spline Count | 19 |
| Steering Wheel Style | Replacement |
| Material Type | Aluminum |
| GENERAL | |
| Overall Diameter | 3.18" |
| Spline Length | 1.88" |
| Major Spline Diameter | 1.24" |
| Inside Diameter | .75" |
| Thread Pitch | 5/16"-18 |
| Finish | Anodized |
| Color | Red |
| Sold in Quantity | Each |
| Notes | QUICK RELEASE HUB 19 SPLINE, 1-1/8 ID |
5
14 Reviews
Customers highlighted the product's quality, practicality, and usability. Many praised its exceptional build, noting its smooth operation and durability. The quick-release hub was considered top-notch for its easy and swift wheel removal. The Sweet quick-release hub, in particular, impressed with its minimal slop compared to older designs. The solid spline collar drew positive remarks for its ease of welding to the steering shaft, with no fore and aft play once installed. Additionally, the product was perceived as the preferred choice among top racers, emphasizing its reliability and superior performance.
5
14 reviews
5
14
4
0
3
0
2
0
1
0
Filter by Ratings
Great quality component for race car steering set up.
5.0
a year ago
Kris
Harlem, GA
Verified
Versatility and quality of this steering wheel quick release is great. Multiple position splines and smooth operation.
Would Recommend
best quick release i have ever used.
5.0
a year ago
4x4
Desert N.V
Verified
I used one on an IMC modified and now on off road 4x4 buggy. I have used other brands that are fumbly and some are sloppy . These ones are great.
Would Recommend
great hub !
5.0
3 years ago
jimmie
bolingbrook, IL
Verified
works great !
Would Recommend
Good product.
5.0
3 years ago
Thehanse
WI
Verified
Purchased after doing a lot of research.
Would Recommend
Great quality
5.0
4 years ago
Sam
Justin tx
Verified
Used on my SCCA American Sedan road race car.
Would Recommend
Best quick release hub for the money
5.0
6 years ago
Rallybob
Spofford, NH
Verified
Replaced an older hex-shaped Wilwood quick release with this new Sweet quick release. Nicely made, much less slop than the old one.
Would Recommend
Good solid collar
5.0
6 years ago
The Rainmaker
Kenmore, WA
Verified
Spline collar was well built and easy to weld on to existing steering shaft.
Would Recommend
i would buy it again
5.0
8 years ago
frank
coldwater mi
Verified
it is for my son fwd race car
Would Recommend
Nice quick-release.
5.0
8 years ago
Ron
Pueblo, CO
Verified
A lot quicker and easier to get the wheel off in a hurry than the pin or push button types.
Would Recommend
Best of the Best!
5.0
10 years ago
RKStonerock
Bakersfield, CA
Verified
Product is top notch..that's why you see all the top racers using the Sweet stuff...
Would Recommend
Showing 10 of 14 reviews
11 Questions • 14 Answers
Will this fit the mpi-dm2 wheel?
by Joh
• 3 years ago
1 answer
View Answer
Does this quick disconnect have three 5/16" Mounting holes on a 1-3/4" bolt circle (hole distance 1-1/2" center-to-center). Wanting to use it with Longacre 52-56838 steering wheel
by Scott
• 8 years ago
1 answer
View Answer
Fit grant steering wheels?
by William
• 8 years ago
1 answer
View Answer
Does the sleeve slide over the steering shaft or inside of it?
by LJones
• 9 years ago
2 answers
View Answers
Is the splined piece steel? I want to weld it onto my 3/4 hollow steering shaft
by Austin
• 9 years ago
3 answers
View Answers
Is the old style or new style with longer splines? Thanks.
by Er
• 9 years ago
1 answer
View Answer
Hello! I have 2 vehicles, 1 of them is 3/4 which this will work for and the other is 5/8. My question to you is if i buy a 5/8 spline and weld it on will this aluminum release fit it? Or are the splines bigger on the 3/4? I'd like to be able to use the same steering wheel on both cars if possible.
by ER
• 9 years ago
2 answers
View Answers
What is the thread pitch on the screws?
by Jchou
• 9 years ago
1 answer
View Answer
What size do I need for my stock 1985 mustang steering column? I plan to weld this on.
by Anon
• 9 years ago
1 answer
View Answer
Does this fit 91032311 column? Looks like spline an shaft size is the same.
by Kevin
• 11 years ago
1 answer
View Answer
10 of 11 questions shown
