|
#91082840
Stock Car 2-Lever Racing Shifter, Black
- Stealthy black finish
- Comes with 2 20" rods, 4 heims and jam nuts are included in the kit
- Spring-loaded design ensure the transmission will not pop out of gear
$95.99
/each
In Stock
$96.99
Save $1.00
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Product Summary
Hardware Included, Floor Shifter Position, Black
- Stealthy black finish
- Comes with 2 20" rods, 4 heims and jam nuts are included in the kit
- Spring-loaded design ensure the transmission will not pop out of gear
- Ideal for circle track race cars
- Ingenious two-lever locking system
Key Specs
| MFG. Part # | 91082840 |
| Position | Floor Shifter |
| Transmission Type | Manual |
| Material Type | Aluminum |
| Finish | Anodized |
Need To Know
Need help?
855.313.9176Quick and Easy Returns
Return PolicySpeedway Motors 91082840 Details
Speedway Motors 91082840 Details
These stealth black two-lever locking shifters feature a spring loaded arm that allows you to make sure your transmission never pops out of gear during a race. Comes complete with a 2 20" rods, 4 heims and jam nuts.
- Black two-lever locking shifter
- Spring loaded arm that allows you to make sure your transmission never pops out of gear
- Comes with 2 20" rods, 4 heims and jam nuts
Speedway Motors 91082840 Specifications
Speedway Motors 91082840 Specifications
| KEY SPECS | |
|---|---|
| MFG. Part # | 91082840 |
| Brand | Speedway Motors |
| Position | Floor Shifter |
| Transmission Type | Manual |
| Material Type | Aluminum |
| Finish | Anodized |
| GENERAL | |
| Hardware Included | Yes |
| Number of Bends | No Bends |
| Color | Black |
| Sold in Quantity | Kit |
Ratings & Reviews
4.5
10 Reviews
The product is highly praised for its strong performance, usability, and good quality. Many customers find it easy to install and set it up with their vehicles. Notably, the shifter has a securing feature that prevents it from jumping out of high gear, increasing its safety. Customers use it for a variety of applications including circle track cars, pulling trucks, and B MODs, highlighting its versatility. A predominant concern mentioned is the confusion about the product description, particularly the length of the rods. Despite the discrepancy, the shifter's effectiveness and great value validate it as a choice above its competitors.
Ratings & Reviews
4.5
10 Reviews
The product is highly praised for its strong performance, usability, and good quality. Many customers find it easy to install and set it up with their vehicles. Notably, the shifter has a securing feature that prevents it from jumping out of high gear, increasing its safety. Customers use it for a variety of applications including circle track cars, pulling trucks, and B MODs, highlighting its versatility. A predominant concern mentioned is the confusion about the product description, particularly the length of the rods. Despite the discrepancy, the shifter's effectiveness and great value validate it as a choice above its competitors.
4.5
10 reviews
5
8
4
1
3
0
2
0
1
1
Most Liked Positive Review
4.0
Perfect set up for column shift delete
Seems like a pretty nice little set up , removed a few spacers,on lock lever so it was closeas it could be to the lever , knotched out another groove in lever so I can lock it into first gear and nuetral and then use the open right hand side shifter for the 2n3 rd gears sweet set up but didn't even come with a sticker !!! Was super sad about that lol
Most Liked Negative Review
1.0
No
The catalog describes the shifter rod lengths as 20 AND 24 inches, it arrived with two 20 inch rods. The length of the rods were part of the reason that I purchased this shifter. The order desk and customer service agreed that the description was confusing. Customer service said that it was changed online and would be changed in the new catalog. Customer service said that I could return the shifter and receive my money back, except that it had already been installed. So I am left holding the bag because I interpreted the description as two different length rods. Listed below the shifters in the catalog are shifter rods, maybe customer service could come up with a solution other than "sorry".
Filter by Ratings
I would buy this again
5.0
8 months ago
Chris
Knoxville, TN
Verified
Works great for my Bert Transmission in my Vintage Late Model
Would Recommend
Yes
5.0
11 months ago
Petro
Phoenix ny
Verified
Work great
Would Recommend
No
1.0
4 years ago
Shifter Rodless
Missouri City Missouri
Verified
The catalog describes the shifter rod lengths as 20 AND 24 inches, it arrived with two 20 inch rods. The length of the rods were part of the reason that I purchased this shifter. The order desk and customer service agreed that the description was confusing. Customer service said that it was changed online and would be changed in the new catalog. Customer service said that I could return the shifter and receive my money back, except that it had already been installed. So I am left holding the bag because I interpreted the description as two different length rods. Listed below the shifters in the catalog are shifter rods, maybe customer service could come up with a solution other than "sorry".
Great product
5.0
4 years ago
Shaun
MS
Verified
Was easy to install and set up.
Does the job
5.0
4 years ago
Tk
Fort Smith ar
Verified
Good product
Would Recommend
Great Product
5.0
5 years ago
09Racer
Kentucky
Verified
Will not let you jump out of high gear.
Would Recommend
Amazing product
5.0
6 years ago
Scooby
Monico,wi
Verified
USRA B MOD
Perfect set up for column shift delete
4.0
6 years ago
Jr
U.p. michigan
Seems like a pretty nice little set up , removed a few spacers,on lock lever so it was closeas it could be to the lever , knotched out another groove in lever so I can lock it into first gear and nuetral and then use the open right hand side shifter for the 2n3 rd gears sweet set up but didn't even come with a sticker !!! Was super sad about that lol
Would Recommend
I install these in all my cars
5.0
7 years ago
The Real Deal
Towanda, Pa
Verified
use on circle track cars great value, locks trans in high gear so it doesn't pop out of gear
Would Recommend
Worked out perfectly!
5.0
10 years ago
Old School Pulling
Claxton, GA
Verified
I used it in a pulling truck with a Profab reverser and it worked perfectly. I used the locking lever for the forward gear, and the other lever for the brake.
Would Recommend
Showing 10 of 10 reviews
Questions & Answers
Questions & Answers
7 Questions • 9 Answers
Can you get two rods the same length for a Bert transmission. Unlike a Brinn or Saginaw on the Bert the shifter connections are the same distance apart, top and bottom not front and rear. Two 15.5" rods would be great, but the 20" inch rod would be way to long.
by Fox
• 8 years ago
2 answers
View Answers
How do you connect this to a Bert LMZ? Do you change the rods ends out? Or just use the rod ends with bolts through the clevis on the transmission? It seems I need something that will go around the clecisnon the transmission for proper security.
by Fox
• 8 years ago
1 answer
View Answer
When using this sifter with either a falcon transmission do i need to change out the heim joints to a clevis joint?
by Aaron
• 8 years ago
1 answer
View Answer
Will this shifter work on my 3 speed saginaw for my sport mod? If so what other hardware would i need to install
by John
• 8 years ago
2 answers
View Answers
Are the levers steel or aluminum?
by Sandy
• 9 years ago
1 answer
View Answer
I was wondering if this would work on my 2 speed powerglide transmission in my race car?
by Matt
• 9 years ago
1 answer
View Answer
what else is needed to install this product on a 1976 plymouth duster, 3 speed manual transmission.
by mopar guy
• 10 years ago
1 answer
View Answer
7 of 7 questions shown