|
#91036096
$8.59
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Universal Fit, 3.625" Overall Length, 1.25" Stud Length
| MFG. Part # | 91036096 |
| Overall Length | 3.625" |
| Overall Diameter | 1.25" |
| Shaft Diameter | .625" |
| Material Type | Steel |
Need help?
855.313.9176Quick and Easy Returns
Return PolicyShock mounting stud is approximately 3-5/8" in overall length. The part where the shock rides, is 5/8" O.D. and approximately 1-1/4" wide and the threads at the shock end are 7/16"-20, about 7/8" long. The threads at the bracket end are 1/2"-20, about 1-1/8" long.
Studs sold individually.
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 91036096 |
| Brand | Speedway Motors |
| Overall Length | 3.625" |
| Overall Diameter | 1.25" |
| Shaft Diameter | .625" |
| Material Type | Steel |
| Finish | Zinc Plated |
| GENERAL | |
| Stud Length | 1.25" |
| Notes | Threads at bracket end are 1/2"-20 x 1 1/8". Threads at shock end are 7/16"-20 x 7/8". |
| Thread Pitch | 1/2"-20 x 1 1/8" |
| Thread Pitch (2) | 7/16"-20 x 7/8" |
| Sold in Quantity | Each |
| Stud Diameter | .625" |
4.9
126 Reviews
Customers have frequently mentioned the excellent quality and practicality of our product, praising its easy installation and perfect fit for numerous car models. The shock mounts are deemed as sturdy, heavy-duty equipment efficient for holding the shocks in place. Their versatility, attractive design, and affordability add to the product's charm. Some users have noted that these are an excellent solution when factory original parts aren't available or have rusted hence solidifying their functionality and usefulness. The product has been endorsed as a worthy purchase multiple times, stressing its superiority compared to others in the market. These reviews in general portray the product as a dependable and high-performing choice.
4.9
126 reviews
5
113
4
12
3
0
2
1
1
0
Most Liked Positive Review
4.0
shock mount bolts
These were exactly what I was looking for, the shipping was timely and the product was as advertised. I am not a big fan of nylock nuts however and replaced them with standard nuts and lock washers. The nylocks are very hard to get started and I did not want to mar the surfaces of the bolts using vise grips to get them on.
Most Liked Negative Review
2.0
Careful buying this product
The only way to loosen a nut on either end of the product is to tighten the nut on the opposite end.
Filter by Ratings
Yes I will buy again
5.0
2 months ago
Drew
New Zealand
Verified
Excellent product Excellent quality Speedway Motors you sell the best parts. Be better if you supplied the nyloc nuts as pictures show in listing.
Would Recommend
Leaf spring U bolt kit
5.0
4 months ago
Toy
Tucson, AZ
Verified
worked out great for rear differential
Would Recommend
Top shock tower bolt
5.0
5 months ago
Beak
Fresno California
Verified
Well made..fits my application perfectly
Would Recommend
I would buy this again
5.0
5 months ago
Tucson T
Tucson AZ
Verified
Worked good on T-bucket front shocks
Would Recommend
Yes I will buy again
5.0
7 months ago
Drew
New Zealand
Verified
Excellent product Excellent quality Speedway Motors you sell the best parts.
Would Recommend
Definitely a Universal Part - 86 Dodge Ramcharger 4x4
4.0
8 months ago
MotorTrash
Oklahoma
Verified
The part itself if great quality, the hardware and threaded portion of the stud were smooth and not jagged. The machined portion was however not the correct size to fit into the shock mounting plate on the truck. There were enough threads on the stud to still be able to bolt it on and, with a little bit of Loctite, it hasn't moved after 100 miles or so.
Would Recommend
Yes I would buy this product again
5.0
11 months ago
Skipper
Defuniak Springs fl
Verified
Perfect for the shock mounts on my vintage racecar
Would Recommend
I would buy this again
5.0
a year ago
Freddyfairlane
Winnipeg Canada
Verified
Well made part
Would Recommend
Never used them
5.0
a year ago
Budd 84
Tucson Az
Verified
Never used them
I would buy this product if I needed it without question
5.0
a year ago
Ant
Long Island, New York
Verified
Perfect fit for my application. Aesthetically looks great.
Would Recommend
Showing 10 of 126 reviews
7 Questions • 8 Answers
I have a ford 9 inch floater rear end set up for a gm metric car. Will these work \.
by Schultz
• 7 years ago
1 answer
View Answer
Will this mount work for coil overs. I have these already installed in my vehicle and have decided to install coil overs
by Robert
• 8 years ago
2 answers
View Answers
Would these work on 1947 ford pickup straight axle by mounting in the axle beam or are they too short. If not what do you recommend...truck has Posies springs.
by David
• 9 years ago
1 answer
View Answer
can this fit an isuzu rodeo My rear stud broke off when replacing shock
by ironhead
• 13 years ago
1 answer
View Answer
Shank diameter Do you sell these with a 1/2" shank for 1991/2 GMC Syclone/Typhoon? The stock shock eye is 1/2" diameter.
by Mark
• 14 years ago
1 answer
View Answer
will this part work on a mr roadster rear 4 bar for a model a ford?
by
• 14 years ago
1 answer
View Answer
What material are these?
by greg
• 15 years ago
1 answer
View Answer
7 of 7 questions shown
