|
#91636100
Universal Steel Rear Shock Mount Bracket for 3 Inch Axle Tube
- This shock mount bracket works well in a variety of applications for use with standard shock as well as coil over shocks
- Three 1/2" mounting holes allow for adjustment from 3" to 5" below the centerline of the axle
- If using with 5/8" hardware simply drill the mounting holes out to 5/8"
$26.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Product Summary
Universal Fit, Steel, Yellow Zinc, 0.50" Hole Diameter
- This shock mount bracket works well in a variety of applications for use with standard shock as well as coil over shocks
- Three 1/2" mounting holes allow for adjustment from 3" to 5" below the centerline of the axle
- If using with 5/8" hardware simply drill the mounting holes out to 5/8"
- Bracket is notched with the proper radius for 3" axle tubes but can be modified for other axle tube sizes
- Constructed of steel and zinc plated for corrosion resistance
Key Specs
| Material Type | Steel |
| Finish | Yellow Zinc |
| Overall Length | 2.91" |
| Overall Width | 3.75" |
| Overall Height | 5.45" |
Need To Know
Need help?
855.313.9176Quick and Easy Returns
Return PolicySpeedway Motors 91636100 Details
Speedway Motors 91636100 Details
- Weld to 3" rear end
- Adjustable 3" - 5" below axle centerline
- Has three 1/2" holes for shocks
- Simply drill hole size to 5/8" when using 5/8" coil-over mounting hardware
Item Details
Adjustable Height
Speedway Motors 91636100 Specifications
Speedway Motors 91636100 Specifications
| KEY SPECS | |
|---|---|
| MFG. Part # | 91636100 |
| Brand | Speedway Motors |
| Material Type | Steel |
| Finish | Yellow Zinc |
| Overall Length | 2.91" |
| Overall Width | 3.75" |
| Overall Height | 5.45" |
| GENERAL | |
| Hole Diameter | 0.50" |
| Welding Required | Yes |
| Material Thickness | 0.20" |
| Notes | Adjustable 3" - 5" below axle centerline. 1/2" diameter holes, must be drilled out to 5/8" for 5/8" mount hardware |
| Sold in Quantity | Each |
Ratings & Reviews
4.8
89 Reviews
Customers are highly satisfied with our product, applauding its high-quality build, adjustability, robustness, and versatility. Notably praised for ease of use in various build projects, the product offers multiple mounting holes for customization and an accurate fit. Consumers commended its adaptability across different vehicle applications and cost-effectiveness. The sturdiness of the material ensures product longevity while offering good value for money. Some users had to modify the product, drilling out the mount holes or tightening the fitting, but overall they were satisfied with its performance and durability in different models of cars and trucks. Despite minor suggestions for improvement, users confirm they would continue purchasing our product for future projects due to its reliable utility and cost-effectiveness.
Ratings & Reviews
4.8
89 Reviews
Customers are highly satisfied with our product, applauding its high-quality build, adjustability, robustness, and versatility. Notably praised for ease of use in various build projects, the product offers multiple mounting holes for customization and an accurate fit. Consumers commended its adaptability across different vehicle applications and cost-effectiveness. The sturdiness of the material ensures product longevity while offering good value for money. Some users had to modify the product, drilling out the mount holes or tightening the fitting, but overall they were satisfied with its performance and durability in different models of cars and trucks. Despite minor suggestions for improvement, users confirm they would continue purchasing our product for future projects due to its reliable utility and cost-effectiveness.
4.8
89 reviews
5
77
4
8
3
3
2
1
1
0
Most Liked Positive Review
5.0
fixable
Nice piece BUT the 3" radius was too wide for my 8" rear. Easy fix,,, I made relief cuts on the sides, squeezed the metal in my vice, welded together.. LIKE A GLOVE! Thought drilling the 1/2" holes to 5/8" would remove too much meat but was happily surprised to see not the case. I would buy them again and i did because being my first build of this type, I am learning. And I learned that this piece works as is or better with a little tweaking.
Most Liked Negative Review
3.0
1/2 holes become too close together
Bought these thinking I could ream holes to the 5/8" needed for Speedway's coil over stud.. HOWEVER the 1/2" holes are too close and the material in between 3 holes becomes too thin. Why they don't make these for 5/8" stud is a question I do not understand as they sell a nice bind free one that compliments the pair if it only fit.
Filter by Ratings
Yes I will buy again
5.0
2 months ago
Drew
New Zealand
Verified
Excellent product Excellent quality Speedway Motors you sell the best parts.
Would Recommend
Yes I will buy again
5.0
2 months ago
Drew
New Zealand
Verified
Excellent product Excellent quality Speedway Motors you sell the best parts.
Would Recommend
Fit and functioned perfectly
5.0
4 months ago
Easyrider
Tulsa, Ok
Verified
Used for T-bucket
Would Recommend
Yes
5.0
10 months ago
Louis
Ky
Verified
Great fitment. Work great for my application. Fit was good
Would Recommend
Yes worked well
4.0
11 months ago
Louis
Ky
Verified
Easy install. Got me what I needed to get the job done
Would Recommend
Excellent quality
5.0
a year ago
Ken
Bonney Lake Wa
Verified
Used these in my '30 Model A.
Would Recommend
Very well made, solid product
5.0
a year ago
AJ
Los Angeles
Verified
Fit my Ford 9" perfectly
Yes if I need it I will
5.0
a year ago
Speed
Illinois
Verified
They work
Would Recommend
i dont need another one but if i did i would buy again
5.0
2 years ago
bill
edgewater fl.
Verified
haven't got them on yet but they fit the axle tube should work great
Would Recommend
On my next project,,, Happy to be rid of the buggy spring...
4.0
2 years ago
Alex
Sahuarita, Az
Verified
All of the above
Would Recommend
Showing 10 of 89 reviews
Questions & Answers
Questions & Answers
6 Questions • 9 Answers
what is the hole center to center measurement?
by bryan
• 9 years ago
1 answer
View Answer
will these mounts fit using a traverse rear spring after Z- ing frame. Rear housing is 3"
by Dave
• 10 years ago
1 answer
View Answer
Mounting question I have seen rear truck axels with the shocks mounted on opposite sides - one in front of axel and one at back of axel (typically Chev/GMC). I have seen other trucks with both shocks either in front or the back. Is there a an advantage for either format when using this part? I have a 46 Chev pickup with a '71 Nova rear axel.
by Gene329
• 11 years ago
1 answer
View Answer
Use with kit # 91649060 Can this mount be used to relocate the coilovers in your rear suspension kit (91649060) under the axle as opposed to on the top of the axle like the instructions show. Will I need to purchase a different axle mount (batwing) to lower the hairpins as well.
by drose
• 13 years ago
2 answers
View Answers
Are these sold in set or each?
by
• 14 years ago
2 answers
View Answers
Can this mount be used for coil overload shocks>?
by
• 14 years ago
2 answers
View Answers
6 of 6 questions shown