|
#91013389
$47.99
/pair
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Universal Fit, 3" Inlet Diameter, 9.75" Overall Length
| MFG. Part # | 91013389 |
| Brand | Speedway Motors |
| Exhaust Tubing Diameter | 3 Inch |
| Finish | Raw |
Need help?
855.313.9176Quick and Easy Returns
Return PolicyThese raw mild steel exhaust kickouts are professionally cut and mandrel bent. The inlet side of these turndowns is expanded to slip over 3" O.D. exhaust tubing.
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 91013389 |
| Brand | Speedway Motors |
| Exhaust Tubing Diameter | 3 Inch |
| Finish | Raw |
| GENERAL | |
| Inlet Diameter | 3" |
| Overall Length | 9.75" |
| Material Type | Mild Steel |
| Sold in Quantity | Pair |
4.8
32 Reviews
Customers appreciate the accuracy and fit of our product, noting that it's exactly what they ordered and it fits perfectly with their vehicle's system. They laud the quality, detailing it as a heavy gauge, rust-preventive and sharp-looking item that makes their exhaust look professionally done. They also underscore its practicality, simplifying the entire exhaust process and effectively deflecting sound and gases. Its easy installation is highlighted, with one customer even welding theirs on without issue. Superior to competitors, our product allows a dust-free drive on dirt roads and is considered a common sense solution to completion of their exhaust and a necessary addition to any vehicle system.
4.8
32 reviews
5
28
4
3
3
1
2
0
1
0
Most Liked Positive Review
5.0
Nice fit and look
I particularly wanted this look for me street rod, a replica of a 60's era modified coupe. These are just what I wanted. My project will be no trailer queen. I want the look of a coupe that was driven hard and put away dusty after a full day at the track. To be street legal, it will still have side pipes and rub rails and these turn outs set off the look perfectly. Thanks!
Most Liked Negative Review
3.0
It was exactly what it looks like
Just the chips and oil were still in them bfrom the saw and the sides were like razor blades so hut it with a file and break clean before putting on
Filter by Ratings
Exceptional exhaust accessory
5.0
2 months ago
Dad's 50
Glenrock WY
Verified
Installed on custom 50 chevy pickup,both turn downs were cut exactly the same, I choose to tig weld speedway's exhuast flange kit for easy adjustments and removal, was worth the few extra dollars
Would Recommend
Would buy again
5.0
9 months ago
Matt
Kentucky
Verified
These have been good. Have had a few years now and still going strong
Would Recommend
I would buy again
4.0
a year ago
Stan
Eldon Mo
Verified
Fit perfect
Would Recommend
Definitely worth it!
5.0
a year ago
Boa
Indiana
Verified
These fit my zemco 305 headers perfectly! Now my exhaust fumes are directed away from the cockpit! Higley recommend these
Would Recommend
It was exactly what it looks like
3.0
2 years ago
Honest car guy
Places
Verified
Just the chips and oil were still in them bfrom the saw and the sides were like razor blades so hut it with a file and break clean before putting on
Would Recommend
I would definitely buy again
5.0
2 years ago
Dash
Freeland Michigan
Verified
Put these on my 1982 GMC truck. Fit great.
Would Recommend
The part is exactly what I ordered.
5.0
2 years ago
Racer
Nashville Tn
Verified
I got exactly what I ordered. However I ordered the wrong size. I should have ordered the 3 1/2" instead of the 3". I had to return the 3" and ordered the 3 1/2". No problem returning or ordering the correct size
Would Recommend
Got the job done
5.0
3 years ago
John
ND
Verified
Works great definitely kicks the dust up
Would Recommend
I would by again
4.0
3 years ago
JD
Arizona
Verified
The pic shows black tips but they were delivered in raw steel. They fit as they should
Would Recommend
Your reviews are a pain to complete
5.0
4 years ago
NONE
Boulder City
Verified
Exhaust on my LT-1 powered '80 El Camino
Would Recommend
Showing 10 of 32 reviews
1 Question • 1 Answer
If they slide over a 3" pipe what clamps would work with them. Just want to make sure so I can order the correct one.
by Tony
• 2 years ago
1 answer
View Answer
1 of 1 questions shown
