Speedway Steering U-Joint, 3/4-36 Spline to 3/4 In Weld-On
Universal Fit, Single Joint Universal Joint Style, 3/4" Round End #1, 3/4"-36 Spline End #2
- 3/4"-36 spline to 3/4" round weld-on
- Help complete your steering setup with this easy to use U-joint
- Forged Steel for long lasting life
- The overall length of this steering universal joint is 3-3/4"
- Features black oxide finish for appearance and mild corrosion resistance
Forged steel 3/4" 36-spline to 3/4" round weld-on steering U-joint.
The overall length of this steering universal joint is 3-3/4".Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.
When purchasing U-Joints, 3 easy steps will help ensure that they will be correct for your application.
Be sure to measure the diameter of the shaft and count the number of splines on the shaft. Some shafts have a blank spot ground on one side. To get the correct number of splines, use a flat edge and cover the blank half of the shaft through the diameter and count the splines on the other half. Multiply that number by 2, thus giving you the total number of splines on the full circumference of the shaft.
Choose which shaft type best suits your application: 3/4" weld on, 3/4" DD or 1" DD.
With these two pieces of information at hand, refer to our chart to find the appropriate part number of the U-joint for your specific application.
Tech Tip #1: When using more than two universal joints in a system, a support heim must be used.
Tech Tip #2: Increasing a U-Joint's angle of operation beyond 30° dramatically increases the stress on the joint, weakening the whole steering mechanism. If a greater angle is needed, add another U-joint.
- Get FREE shipping when your order includes this item and exceeds $99! Ground shipping only in the contiguous US.
More Like This
Sweet U-Joint, 3/4"-36 Spline To 3/4" Round Weld-on
Speedway Forged U-Joint, 3/4 Round to 3/4 Round
Sweet Mfg. Double Steering U-Joint, 9/16In-26 Spline to 3-4 In DD, MII
Sweet Mfg Chrome Steering U-Joint, 3/4 In DD to 3/4 In DD, Universal
Sweet Mfg Chrome U-Joint, 3/4-36 Spline, 1 DD, GM Manual/Mustang II
Sweet Mfg Steering U-Joint, 5/8-36 Spline to 1 DD, Vega, Corvair, GM
Sweet Mfg Steering U-Joint, 13/16-36 Spline, 3/4 In DD, Big GM Pre '78
Sweet Mfg Chrome U-Joint, 3/4-30 Spline to 3/4 DD, Small GM P/S '78-Up
Sweet Mfg Chrome U-Joint, 3/4-30 Spline to 1 DD, Small GM P/S '78-Up
Sweet Mfg Chrome U-Joint, 3/4-48 Spline to 1 In DD, Wilwood, MGB
Q & A
Our new 383 engine gets installed in the '32 Roadster. We also update the steering wheel, shift knob/adapter, and wheels and tires. It's got some real 1960's flair now!
If you're going to buy a horn isn't it nice to know what it sounds like first? That's why Speedway produced a helpful video to hear the differences in the unique horns that we offer.
Designing a steering system for your street rod can be tricky. In this article, we'll show you how to choose the right U-joints and steering shaft for the job.
Learn how to determine steering box, rack, and spline sizes.
How to install an electronic power steering unit in a micro sprint and the benefits of using power steering. This article includes which parts to use to complete your power steering installation.
If you are confused as to how that new steering wheel you want is going to attach to your project's steering column then this buyer's guide should be your first visit before adding that new wheel to your shopping list.
Jared demonstrates how to install a Sweet Manufacturing collapsible steering column in his 3rd gen Camaro. The collapsible portion not only makes the column safer in a crash but also gives you the length adjustment.