|
#91634034
$26.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Steel Bushing Material, 2.40" Overall Length, Steel
| Bushing Material | Steel |
| Overall Length | 2.40" |
| Inside Diameter | .50" |
| Material Type | Steel |
| Finish | Natural |
Need help?
855.313.9176Quick and Easy Returns
Return PolicyThese steel lower control arm bushings are virtually "bulletproof". They will minimize alignment change during cornering since they do not deflect. Bushings are sold each and include a grease zerk fitting for lubrication.
Camaro/Nova
68-72 GM A-Body Front
the outside dia of the sleeve is 1.00"
Charts
Guides & Documents
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 91634034 |
| Brand | Speedway Motors |
| Bushing Material | Steel |
| Overall Length | 2.40" |
| Inside Diameter | .50" |
| Material Type | Steel |
| Finish | Natural |
| GENERAL | |
| Outside Diameter | 1.40" |
| Flange Diameter | 1.49" |
| Sold in Quantity | Each |
| Notes | Correct width for using a Nova lower control arm on a Camaro or Nova stub. Includes grease zerk. PRESS IN TYPE ZERK |
4
6 Reviews
Customers value the product for its simplicity, practicality, and easy installation, noting a clear improvement in steering feedback and predictability. Minor criticisms lie with the design of the grease fittings, which some found were better with a screw-in variant rather than the provided press-in type. However, the product was praised for being 'exactly what I was looking for', and its precision machining and fit were highlighted as key features. Overall, customers would repurchase, recommending it for its noticeable impact on performance.
4
6 reviews
5
2
4
3
3
0
2
1
1
0
Filter by Ratings
I would buy this product again
5.0
2 years ago
Keno
Gambrills MD
Verified
Easy installation but would have preferred a screw in grease fitting
Would Recommend
I would buy again
5.0
4 years ago
N/A
Sheridan Wy
Verified
Exactly what I was looking for.
Would Recommend
no threads
4.0
10 years ago
nonenone
earthcal
Verified
Worked fine
Would Recommend
unscrewed
4.0
10 years ago
none
earth
Verified
these of course are petty simple items just sleeves. Your were machined correctly and fit fine. Ones I had purchased in the past had press in zirks, these came with threaded ones BUT to threads in sleeve???
Would Recommend
Poorly designed grease fitting holes.
2.0
12 years ago
Maxer1
Undisclosed
The holes for the grease fittings are poorly designed.The grease fittings are press in.When the fittings are pressed in they hit the inner bushing. Had to tap the holes and install threaded fittings and made sure they weren't hitting the inner bushing.
Must have
4.0
16 years ago
Jed the head
Chico Ca
Used in a Dirt modified. After running last year(my rookie year) at one of the most hooked up tracks in the nation with rubber bushings, then switching them to steel, I can tell you I felt a very positive improvement in steering feedback and predictability!
Would Recommend
Showing 6 of 6 reviews
1 Question • 1 Answer
What is the outside diameter of the inner sleeve?
by BQ
• 8 years ago
1 answer
View Answer
1 of 1 questions shown
