|
#91011851
$17.49
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Universal Fit, 1-1/2" Gauge Diameter, White, Black, Red
Need help?
855.313.9176Quick and Easy Returns
Return PolicySet correct fuel pressure and eliminate adjustment guesswork. Remote mounting under the hood. 0-15 psi gauge with 1-1/2" face and 1/8" pipe connection.
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 91011851 |
| Brand | Speedway Motors |
| Gauge Style | Mechanical |
| GENERAL | |
| Gauge Diameter | 1-1/2" |
| Gauge Series | Analog |
| Gauge Face Color | White |
| Lettering Color | Black |
| Needle Color | Red |
| Gauge Range | 0-15 PSi |
| Outside Diameter | 1.67" |
| Body Diameter | 1.60" |
| Body Length | .97" |
| Thread Pitch | 1/8" NPT |
| Bezel Finish | Black Paint |
| Material Type | Steel |
| Sold in Quantity | Each |
4.7
16 Reviews
Customers appreciate the product for its reliability and functionality. Its key features include accurate fuel pressure reading, good thread engagement, and leak-free operation. The clarity of numerals and easy-to-read face is praised, making mount set up a low cost task. Customers used it to effectively regulate and monitor fuel pressure as well as to diagnose engine issues. One user noted a temporary discrepancy, but it self-corrected. It outperforms in comparison, proving to be a valuable tool in engine compartments for its practical and time-saving operation.
4.7
16 reviews
5
12
4
3
3
1
2
0
1
0
Most Liked Positive Review
5.0
Works great... Helpful diagnostics
I was having problems with a new 600 holley that has non-adjustable floats... requires 4-6 psi max and my fuel pump was putting out about 12. Worked great getting fuel pressure to proper amount by using the gauge and an external fuel pressure regulator...
Most Liked Negative Review
3.0
Not great but works
I installed this on a new regulator I bought from Speedway at the same time. It worked fine the first time but when I fired the engine up the second time the gauge read about 12 lbs. instead of 4 lbs. where I had the regulator set. I had to tap the gauge with a screwdriver about 10 times before the reading started coming down. I shut the engine off and waited about 10 minutes and fired it up again. It read 4 lbs. and worked okay after that.
Filter by Ratings
I would recommend it to others
5.0
a year ago
Micks55toy
Lincoln Ne
Verified
It was what I needed to tell what pressure I had set
Would Recommend
I would buy this product again if I needed it
5.0
a year ago
Racer80
Missouri
Verified
Use on my micro sprint works good.
Would Recommend
I would buy this product again, works great.
5.0
a year ago
Wicki Tickei
Lilliwaup, Washington
Verified
I used this to know fuel pressure on Rodchester tri power. Works great.
Would Recommend
Good purchase
5.0
2 years ago
Miguel
Clovis CA
Verified
Good fit & finish. Works good.
yes
5.0
6 years ago
dave
mercer pa
Verified
regulatethe fuel pressure
Would Recommend
Yes I would by again
5.0
6 years ago
Shawn
Lincoln
Verified
Installed and working fine
Would Recommend
Yes
5.0
6 years ago
DJ
Lake Charles, Louisiana
Verified
Good thread engagement with no leaks, accurate.
Would Recommend
Yes
5.0
6 years ago
DJ
Lake Charles, Louisiana
Verified
I give it 5 stars because it's exactly what it says it is. It reads correctly - verified with another gauge and fits well with good thread engagement and no leaks.
Would Recommend
Not great but works
3.0
9 years ago
Bob
Washington State
Verified
I installed this on a new regulator I bought from Speedway at the same time. It worked fine the first time but when I fired the engine up the second time the gauge read about 12 lbs. instead of 4 lbs. where I had the regulator set. I had to tap the gauge with a screwdriver about 10 times before the reading started coming down. I shut the engine off and waited about 10 minutes and fired it up again. It read 4 lbs. and worked okay after that.
Would Recommend
I would buy this product again
4.0
9 years ago
TJ
Englewood, FL
Verified
Mounted to a fuel block to monitor pressure
Would Recommend
Showing 10 of 16 reviews
2 Questions • 3 Answers
need fitting to connect to fuel pressure regulator I have a fuel pressure regulator, part number 910-12803. This unit has NPT 3/8 female ports, I'm going to use the extra port for this fuel gauge. what fittings and /or adaptors do I need to connect the pressure regulator to the fuel pressure gauge?
by John
• 12 years ago
1 answer
View Answer
Does this gauge have a glass lens in it?
by lostfords
• 14 years ago
2 answers
View Answers
2 of 2 questions shown
