|
#91034444
$150.99
/pair
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Need help?
855.313.9176Quick and Easy Returns
Return PolicyOur Speedway Mustang II Ride Height Adjusters are the perfect addition to any Mustang II front suspension system. These adjusters are easily installed in a few short hours and are designed for any level of DIY mechanic skill - so that everyone can enjoy the benefits of more suspension adjustability!
These adjusters allow for an additional 1.5" of precision ride height adjustment by modifying your upper spring hat on your Mustang II crossmember. Install is as easy as cutting a hole in the top of the upper spring hat and bolting these adjusters in place.
This system can be used with traditional springs and shocks or can be used in addition to the benefits and adjustability of a true coil over shock setup! These adjusters are designed to prevent you from running out of shock length when making crucial suspension ride height adjustments.
Charts
Guides & Documents
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 91034444 |
| Brand | Speedway Motors |
4.7
18 Reviews
Customers commend the product for its confirmed quality and practicality, especially in their ability to adjust ride height. They found the product to be durable, well-built, and enhanced with a superior black oxide coating that exceeded their expectations. It is seen as a cost-effective alternative to adjustable coilovers, while maintaining ride quality. Users remarked on the relative ease of installation with basic tools, though some noted that it may require additional metalwork. However, the improvement in safety and control of their vehicles was seen as worth the effort, with many customers choosing this product over competitors for its simplicity and effectiveness. Despite the price, customers found the product to be a worthwhile investment for its notable features and advantages.
4.7
18 reviews
5
16
4
0
3
1
2
1
1
0
Most Liked Positive Review
5.0
Excellent kit let's you finevtune ride Height
Very easy to install my 56 f100 was setting too low so after installing speedways kit I was able to adjust it up 2 1/2 inches I reversed the top mount and I still have another half inch of adjustment. Also I drilled out the holes on the top mount and installed 3/8 bolts much stronger setup
Most Liked Negative Review
3.0
ride height adjusters
Excessive metal removal to upper control arm tower necessary to install these extenders. had to search for a speedway video to see just what needed to be cut away on tower in order to install. extensive metal work I thought was needed. Why couldn't the towers be provided with these ride height adjusters already be install for customers ?
Filter by Ratings
yes
5.0
11 months ago
bob
new york
Verified
well constructed
Would Recommend
this product saved me from having to do a major rebuild
5.0
3 years ago
mr.mustang
fort worth texas
Verified
needed the front of my build up about two more inches for me to feel comfortable with it on rougher roads so wouldnt bottom out as easy
Would Recommend
Excellent, quality product.
5.0
6 years ago
Dave
Stevensville, MD
Verified
a little pricy, but worth the extra money.
Would Recommend
Great product.
5.0
7 years ago
DaSkunk
Ojai,Ca.
Verified
I'm using these on a 56 Tbird with Mustang II IFS. Makes adjusting the ride height up and down a snap. Cheaper than adjustable coilovers and maintains the ride quality. Very well built product. Thanks SPEEDWAY.
Would Recommend
Very good quality
5.0
8 years ago
Bill
South Lyon, MI
Verified
The pictures don't show it, but these adjusters have a high quality black oxide coating. I expected them the be bare metal. I was pleasantly surprised. I would buy these again.
Would Recommend
Would definitely buy again
5.0
8 years ago
Dt
Blooming Prairie Minnesota
Verified
Very easy to install
Would Recommend
Quality product
5.0
9 years ago
Malcolm
San Antonio, Texas
Verified
Comes black anodized
Would Recommend
easy to install
5.0
9 years ago
Lucky (today)
Argyle N.Y.
Verified
Installed on a Saturday morning with just a few tools, grinder, drill, and basic hand tools , solved ride height adjustment with ease
Would Recommend
ride height adjusters
3.0
9 years ago
spartan74
Amarillo,texas
Verified
Excessive metal removal to upper control arm tower necessary to install these extenders. had to search for a speedway video to see just what needed to be cut away on tower in order to install. extensive metal work I thought was needed. Why couldn't the towers be provided with these ride height adjusters already be install for customers ?
Would Recommend
ride height adjuster
2.0
9 years ago
ford crossbreeder
pampa, TX
Verified
Lots of demo to the spring tower before these baby's could be mounted.. haven't got truck IFS together yet to see how they'll work..
Showing 10 of 18 reviews
5 Questions • 9 Answers
Will these work with the mustang 2 stock spring towers, or do they only fit in the aftermarket upper towers
by Greg
• 8 years ago
1 answer
View Answer
According to an answer to a previous question, you can't use these to raise the ride height of a speedway mustang II suspension?
by Wally
• 9 years ago
2 answers
View Answers
What size spring are these for?
by Vette
• 13 years ago
2 answers
View Answers
can you make this truck set as stock heigth with these and mII suspension
by ls11949
• 13 years ago
2 answers
View Answers
how do you install this kit and still connect your shocks.
by Ronald
• 14 years ago
2 answers
View Answers
5 of 5 questions shown
1974-1978 Ford Mustang II
