Speedway Motors Short Arm Metric Replacement Spindle
Stock Car, Chevy/GM Custom Spindle Style, Stock Height Spindle Drop, Disc Brake System Type
Speedway Motors is proud to introduce our exclusive 3-piece Short Arm Metric replacement spindle to be used in conjunction with the 1979-up GM Metric front brake rotors, bearings and calipers. Our advanced engineering techniques allowed for a redesign of the spindle in a newly forged, heat-treated steel design that is both stronger and lighter than the original. These spindles serve as a replacement for cars currently running Pinto/Mustang II setups. The 8 degree pin inclination not only improves handling and driver feel, but also dynamically adds cross weight to the car during counter steering which leads to increased drive off the corner. The shortened, dropped steering arm reduces spacing requirements on outer tie rods and minimizes bump steer while improving overall strength.
Accepts '79-Up GM Metric rotors, calipers, stock tapered lower ball joints and is reamed to accept 7 degree upper ball joints. The unique three-piece construction provides for fast, convenient and affordable replacement of individual components in the event of a crash. These spindles are IMCA/USMTS/USRA approved for use in competition.
Kit includes spindle, bolt-on "short" steering arm, caliper bracket and necessary hardware. Assembly is required. Choose (L) Left or (R) Right side.
Works great with our 1979-Up GM Metric front brake rotors, bearings, calipers, etc.
- IMCA approved for IMCA Modifieds and Sport Mod divisions
- USMTS/USRA approved
- Forged, heat-treated steel
- Improves front end geometry
- Replacement for Pinto spindle
- Three-piece design for quick, easy replacement
This item has been deemed legal for UMP use.
More Like This
IMCA Short Arm 3-Piece Spindle With Wilwood Rotor Kit
Speedway Motors Short Arm Metric 3-Piece Spindle, Body Only
Speedway Motors 1979-Up IMCA GM Metric Midsize Spindle, Body Only
Speedway Motors 3-Piece 1979-Up IMCA GM Metric Midsize Spindle
Speedway Motors 1979-Up IMCA GM Metric 3-Piece Spindle Kit
Reconditioned 1980-90 GM Fullsize Spindle, Left
Stock 1979-UP GM Intermediate Midsize Spindles
1973-77 Intermediate GM Spindle, Left
Wilwood 830-10832 WWE Pro Spindle, 74-80 Pinto/Must II, Stock Height
Wilwood 830-9807 WWE Pro Spindle, 74-80 Pinto/Must II, w/ 2 Inch Drop
Q & A
Today we are installing original style pump, pulleys, brackets, and hoses! Watch as Joe and Zach improve the ratio and make driving the Chevelle easier.
Learn about Mustang II Power steering and the components that are necessary for success.