Speedway Motors 5/8 Inch Fine Thread Wheel Studs, Box Of 5

Replace those "puny" stock wheel studs with these "super-strength" oversized wheel studs.

Item Details

0.375" Knurl Length

1.5' Thread length

• Replace those puny stock wheel studs with these super-strength oversized 5/8" wheel studs
• 5/8"-18 thread for use with fine thread lug nuts
• .375" knurl length works well in rear axles as well as rotors or front hubs
• Black oxide coated for corrosion resistance
• 0.685" knurl dia. for recommended standard hole size 0.669" to 0.679"

Recommended drill bit size is 43/64" (0.6719")  # 910-82007

Recommended Press Fit for press-in wheel stud 

• Steel Hub          0.006"-0.016"
• Aluminum Hub   0.010"-0.016"

Tech Tip:  If nearest standard drill bit is too small, you will need to use an appropriately sized reamer to enlarge the drilled hole until it is within the tolerance for the desired press fit.