Speedway Low Friction K5208 Style Extended Stud Ball Joints

#91720145

Speedway Low Friction K5208 Style Extended Stud Ball Joints

Name: Speedway Low Friction K5208 Style Extended Stud Ball Joints
Brand: Speedway Motors
SKU: 91720145
Rating: 4.7 (15 reviews)

15 Reviews

2 Questions

The 32 degree swing angle to allow maximum suspension travel
Ball joints will get the desired angles back where they need to be
Features a low friction design (polished ball and housing)

Size:

Select a size

$96.99

/each

In Stock

Quantity

Need Help? Call to Order

Add to a list

Select a vehicle to verify Fitment

Select Vehicle

Product Summary

Hobby Stock, Modified, Sport Mod, Stock Car, Greaseable

The 32 degree swing angle to allow maximum suspension travel
Ball joints will get the desired angles back where they need to be
Features a low friction design (polished ball and housing)
The stud is specially designed to bend before it breaks
It is fully bolt-in and is the same 10 degree stud taper as Moog K-5208

See more details

Key Specs

MFG. Part #	Select Size
Position	Upper
Ball Joint Type	Bolt-in
Greaseable	Yes
Material Type	Steel

See more specs

Need To Know

Need help?

855.313.9176

View the Help Center

Quick and Easy Returns

Return Policy

Details

32 degree swing angle to allow maximum suspension travel
Small or big tires, car raised or lowered - these ball joints will get the desired angles back where they need to be
Not for street use - offroad use only
Low friction design (polished ball and housing)
Stud is designed to bend before it breaks
Bolt-In
Small bolt circle
Same 10 degree stud taper as Moog K-5208
Choose 0.5" or 1.0" extended length stud
Ball joint boot not included - can utilize # 917-22399 when required

Fits 1970-81 Camaro, 1973-83 Chevelle/Malibu, 1973-88 Monte Carlo, 1994-96 Impala, 1971-93 GM Full-size.

CA WARNING:

Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov

Specifications

KEY SPECS
MFG. Part #	Select Size to see
Brand	Speedway Motors
Position	Upper
Ball Joint Type	Bolt-in
Greaseable	Yes
Material Type	Steel

GENERAL
Degree of Taper	10 degree
Notes	FOR DUST BOOT: 7219034107
Sold in Quantity	Each

Ratings & Reviews

4.7

15 Reviews

Overall Assessment

Customers highly recommend the product for its perfect fit, especially in modified applications like 1991 s10s and c4 Corvettes. Some note improvements in handling. There are comments on its reliable performance and high quality. However, a boot inclusion is suggested, and its absence has been pointed out for enhanced protection against debris. Comparisons highlight our superior quality over competitor products despite a slightly higher friction level. Overall, it's preferred for its durability even in rugged conditions transforming it into a choice product for racing purposes.

Write A Review

4.7

15 reviews

Most Liked Positive Review

4.0

Fits c4 corvette!

I used this on a 1984 c4 corvette, the bolt pattern and the taper are the same. The bottom of the tapered hole in the c4 upper spindle however was .015 too small and needed to be drilled with a 1/2" bit to get the ball joint shaft to drop in. The provided washer is also too thick and needs replacement for this application. This ball joint gives exactly 1" of raise vs the factory c4 joint.

Most Liked Negative Review

3.0

Lack of quality, but you get what you pay for.

I needed a quality extended shaft ball joint, and low friction was a secondary concern. With this part, I got a ball joint that was indeed low (no) friction, but it had about .010 play in the socket, which was not acceptable. On top of that, the ball and grease are exposed to debris, which was a concern being I did not want to replace these ball joints frequently. I later purchase a more expensive AFCO low friction extended ball joint that had no play, but slight amount of friction, with a boot. I was perfect, so I ordered another one.

Filter by Ratings

Sort Reviews

Ball joints

5.0

a year ago

anadragnova72

San Antonio, Texas

Verified

Very good quality, well packaged for shipping.

Would Recommend

Purchased multiple!

5.0

a year ago

Gambit

Florence SD

Verified

Use these on our drag cars! Great product! Will buy more!

Would Recommend

Can't beat the quality and price

5.0

a year ago

Dan

Iowa

Verified

Best non rebuildable balljoints on the market for classes like imca hobby stock it doesn't get any better great item

Would Recommend

yes

5.0

2 years ago

sam

Missouri

Verified

I use this in my racecar

Would Recommend

Fit perfect and gave me that extra

5.0

2 years ago

Jay

New Jersey

Verified

Fit great gave me the extra travel I was looking for

Would Recommend

Great product. Would definitely buy again when needed.

5.0

2 years ago

San Juan , TX

Verified

Perfect fit for the modified application.

Would Recommend

Yes

5.0

3 years ago

Evangelist

San Diego

Verified

Got delivered quick but the return was annoying

Yes

5.0

3 years ago

Knight garage

Verified

Very nice product

Would Recommend

Iwillbuy again

5.0

4 years ago

Napalms10

Ohio

Verified

Not much to say, great product

Would Recommend

Work right, felt right, looks good

5.0

5 years ago

Ross

South Georgia

Verified

Did exactly what it was built for. Installed on my 1991 s10 with stock upper control arms.

Load More Reviews

Showing 10 of 15 reviews

Questions & Answers

2 Questions • 2 Answers

Sort Questions

Will these fit a stock 73 firebird?

by Travis

• 2 years ago

1 answer

View Answer

Hi, I have a 1989 s10, and I was wondering if those balljoint will fit, and witch lower low friction ball joint will fit?

by Larry

• 7 years ago

1 answer

View Answer

2 of 2 questions shown