|
#91011852
$37.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Universal Fit, 1-5/8" Gauge Diameter, White, Black, Red
Need help?
855.313.9176Quick and Easy Returns
Return PolicyHigh quality, liquid-filled stainless steel fuel pressure gauge for remote mounting.
Charts
910-11852 Instructions (PDF)
Guides & Documents
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 91011852 |
| Brand | Speedway Motors |
| Gauge Style | Mechanical |
| GENERAL | |
| Gauge Diameter | 1-5/8" |
| Gauge Series | Analog |
| Gauge Face Color | White |
| Lettering Color | Black |
| Needle Color | Red |
| Gauge Range | 0-15 PSi |
| Liquid Filled | Yes |
| Outside Diameter | 1.83" |
| Body Diameter | 1.63" |
| Body Length | .82" |
| Thread Pitch | 1/8" NPT |
| Bezel Finish | Stainless |
| Material Type | Stainless Steel |
| Sold in Quantity | Each |
4.6
39 Reviews
Customers generally find the product to be of high quality and excellent value for money. It is easy to mount, use, and read. It provides accurate pressure readings, essential for tasks like monitoring fuel pressure in cars. The gauge's design is frequently praised as aesthetically pleasing. Some users noted that they had purchased the product multiple times, indicating trust in its long-lasting performance. However, there were isolated incidents of fluid leakage and inconsistent readings. Knowledge about its operation, such as reading low when heated due to being liquid-filled, enhances user experience. Overall, customers are satisfied with its functionality and recommend it over other less reliable gauges.
4.6
39 reviews
5
31
4
4
3
1
2
1
1
2
Most Liked Positive Review
5.0
Best Value
The one I got is Very Well Made. Looks great and functions as it should. I read the instruction sheet and found out that it is no vented, cause it's liquid filled. This makes the gauge read low as it gets hot. So if you mount it on the engine like I did, it is only really acurite when it is cold and you start up the engine. After the gauge heats up it reads low. Not a problem if you understand how it works. Other non filled gauges are at atmosheric pressure inside and that's what they referance for the reading.
Most Liked Negative Review
1.0
Tried two of these gauges and neither worked
Both gauges were inoperative (needle did not move). Third gauge from you (different supplier) worked great. Thanks for your help, but you should check quality on some suppliers (probably China) and take action. chuck
Filter by Ratings
No
5.0
7 months ago
Jamie Raso
Pa
Don't know didn't get in time
Would Not Recommend
Speedway Liquid Filled Fuel Pressure Gauge
5.0
9 months ago
Bobby 1
NJ
Verified
Unlike the non liquid meter, this meter reads steady and does not fluctuate
Would Recommend
Yes
5.0
a year ago
Cheech
Pace fl.
Verified
Works good
Would Recommend
would buy it again
5.0
3 years ago
Eric
Lincoln, Ne
Verified
Great product, mounted up great, great pressure reading
Would Recommend
Good product
5.0
3 years ago
Bernie
Belmont, CA
Verified
It works
Would Recommend
Quality. Does what I expected
5.0
3 years ago
Joe
NY
Verified
I can watch the fuel pressure of my Edelbrock carb...they like a steady 5.5-6 psi
Would Recommend
Yes
5.0
4 years ago
Lance
San Pedro, CA
Verified
The instructions should be a little more clear about the rubber plug.
Would Recommend
Yes. Nice gauge
5.0
4 years ago
Fastmc25
La Follette, Tn
Verified
On fuel systems
Would Recommend
Best bang for the buck!
5.0
5 years ago
Jerad
Surprise,AZ
Verified
Was looking for an inexpensive liquid fill gauge so thought I would give it a shot. Great value for the money and easy to read.
Would Recommend
yes i would buy this again, but i know this will last a long
5.0
5 years ago
lumpy
omaha ne.
Verified
looks great , works great,
Would Recommend
Showing 10 of 39 reviews
4 Questions • 6 Answers
Why are the gauges filled with a liquid? Is that to prevent fuel leaks. Are the gauges that are not filled with liquid more reliable and more actuate? What is the best brand? I have a gauge installed now, which came with my Weber Carburetors that is liquid filled and it has failed by not going back to zero. But still goes up 3 lbs when the pump is turned on.
by Barrey
• 9 years ago
2 answers
View Answers
Is the 1/8" NPT connection on the back or bottom of the gauge?
by Shawn
• 10 years ago
1 answer
View Answer
What is the fluid these are filled with ? is it water or some kind of oil ?
by MOONS
• 12 years ago
1 answer
View Answer
Are these Glass faced? Must not be plastic or acrylic. Fuel ruins everything but glass.
by
• 15 years ago
2 answers
View Answers
4 of 4 questions shown
