|
#91720249
$36.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Universal Fit, Steel, Yellow Zinc, 0.56" Hole Diameter
| MFG. Part # | Select Left/right |
| Brand | Speedway Motors |
| Material Type | Steel |
| Finish | Yellow Zinc |
Need help?
855.313.9176Quick and Easy Returns
Return PolicySteel leaf spring lower shock mounting plate. Eases the mounting of rear shocks.
Note: The left shock mounting plate is shown on the left side of the photograph. The right shock mounting plate is shown on the right side of the photograph.
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | Select Left/right to see |
| Brand | Speedway Motors |
| Material Type | Steel |
| Finish | Yellow Zinc |
| GENERAL | |
| Hole Diameter | 0.56" |
| Center to Center | 3.63" |
| Material Thickness | .25" |
| Notes | Right and left side are sold separately. |
| Sold in Quantity | Each |
4.7
51 Reviews
Customers highly praise the product for its high quality, good fit, and overall practicality. It's highlighted for its robust construction, providing excellent durability and performance. The part is well designed and is considered excellent value for money. Some customers shared that they had to modify the product for different applications, proving its versatility. The product stands out for its ease of assembly and installation. Customers also appreciated its compatibility with different components. However, some users advised potential buyers about choosing the appropriate axle plates or rebushing to ensure proper fit. Several customers have recommended the product and expressed their willingness to purchase again due to its top-notch quality and use.
4.8
51 reviews
5
42
4
6
3
2
2
1
1
0
Most Liked Positive Review
5.0
Does the job
Fit a Mopar 8 3/4 under a '74 b body. The shocks mount very close to factory location. Two problems were the u bolt holes are drilled for 9/16" and stock u bolts are 1/2", so I needed to find the right washers, and the stock lower shock bushings were to big to fit properly. To remedy this I pressed out the steel sleeves from the original upper shock bushings. I used those , the washers , and a 1/2 bolt to install it. I cannot comment on the durability of the part as of yet.
Most Liked Negative Review
2.0
I would not buy this product again
The shock mounting plates were evidently manufactured by different vendors. The shock mounting bosses were designed different and one mounting plate was anodized gold and the other was anodized silver. They worked fine but now they will have to be powder coated unless I make my 55 chevy a rat rod.
Filter by Ratings
Home run
5.0
a year ago
Mopar fan
Modesto, Ca
Verified
Used on Chrysler 8 3/4. Fit well, built well with an excellent finish.
Would Recommend
Solid product
4.0
a year ago
Jim
Modesto, Ca
Verified
Used for my axle flip on an old pickup. Fit great.
Would Recommend
perfect
5.0
2 years ago
Dude
USA
Verified
Fits goodfast!
Would Recommend
Good fit quick delivery good price. Speedway does it again.
5.0
4 years ago
Smitty
San Antonio TX
Verified
Put a newer 10 bolt in a '54 Chevy project.
Would Recommend
Parts for my 72 nova
4.0
4 years ago
James
Texas
Verified
Overall the part is a good quality but if you're trying to use these leaf Spring plates on a stock axle with stock Axel bracket they will not work, ln order to use these leaf spring plates you will need the correct axel plates that speed way offers!
Would Recommend
Requires modification
3.0
4 years ago
willydude
Fair Oaks, CA
Verified
Center hole that goes over leaf spring bolt is too small. Had to drill out so pad would lay flat on spring. I believe it was a 1/2" hole, probably should be 9/16" to make it more universal. Other than that, worked great.
Would Recommend
Should I need to buy again Speedway would be the first optio
5.0
4 years ago
Jay
Corpus Christi, Texas
Verified
We use it on the rear end of a 1951 chevy truck. Not on e problem.
Would Recommend
I would buy it again
5.0
4 years ago
Tony
Spanaway Wa
Verified
Great help from the attendant
Would Recommend
i would buy again if and when needed
5.0
4 years ago
rally fan
St.Albans, in the WV
Verified
well made good value for money
Would Recommend
Part was as described.
5.0
5 years ago
Cola
Vacherie,La
Verified
Good design on the part.
Would Recommend
Showing 10 of 51 reviews
21 Questions • 12 Answers
What is the thickness of the plate
by Boygone
• 3 years ago
1 answer
View Answer
Will this fit a s10 with a 9 inch rear end that has 3 inch tubes
by Eric
• 4 years ago
1 answer
View Answer
will these fit on a 69 camaro mono leaf with 2" lowering blocks? lower shock ear is rubbing on tire where the shock is mounted on stock set up.
by Brad
• 6 years ago
1 answer
View Answer
What is the O.D. Of the shock stud?
by Bill
• 7 years ago
2 answers
View Answers
Does anyone make a leaf spring plate like this with a 3.5 inch shock drop or sell a extension to allow a longer shock? Limited on vertical room ..34 Ford sedan dirt track car with a 3 inch tube quick change..
by Junkyard Dog
• 8 years ago
1 answer
View Answer
Will these work on a 8 1/4 in a 89 Comanche with a 4 1/2 inch lift with 2 1/2 wide leafs with stock shock location
by Fred
• 8 years ago
1 answer
View Answer
Will this work with an 8 1/4 rear end in a 67 dart? 2.5 inch leaf springs and stock shock location
by Evans31
• 8 years ago
2 answers
View Answers
Will these work with a 79 Camaro?
by Christopher Burns
• 9 years ago
1 answer
View Answer
a. Will leaf spring mount 91720249 work with 2" spring and 3" axle ( 9" axle in '53 F100) ? b. Is 91720249 a set will L&R mounts, or are L&R sold separately? If separate and different, what are part numbers? c. Recommended shock stud?
by Bob
• 9 years ago
1 answer
View Answer
Will this work for a 67 C Body Plymouth Fury 3?
by Dadpool
• 10 years ago
1 answer
View Answer
10 of 21 questions shown
