|
#91047260
$528.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Universal Fit, 60.00" Hub-to-Hub Width, 3.00" Tube O.D.
| MFG. Part # | 91047260 |
| Hub-to-Hub Width | 60.00" |
| Flange-to-Flange Width | 55.00" |
| Tube O.D. | 3.00" |
| Material Type | Steel |
Need help?
855.313.9176Quick and Easy Returns
Return PolicyLooking for a budget-friendly, rock-solid foundation for your custom rear suspension? Look no further. Our fabricated steel Ford 9 inch axle housings feature all-new components for maximum durability. It’s an evolution of the rugged and reliable 9 inch Ford platform.
This housing is pinion-centered with unequal-length axle tubes, side-to-side. So driveline alignment is much easier. Unlike factory stamped housings, these fabricated plate-steel center sections provide a wide, flat surface for easy bracket attachment. Note that the pinion-centered design will offset the pumpkin to the driver side.
Axle tubes are 3” O.D. with a 3/16” wall thickness. Heavy-wall tubes, along with a larger center section, significantly reduce distortion during welding of rear-link brackets or spring pads. Billet steel “New Big Ford” (Torino) style bearing ends are fixture-welded (3.150” O.D. bearing, with 2.50” axle flange offset).
In addition to the heavy-duty bearing ends, the axle tubes are supported with bracing inside the large center housing. This reduces flex in the rear end housing, which is something you won’t find on stamped factory 9 inch housings. Plus, gears stay well-lubed and run cooler thanks to a large-capacity fabricated center (holds more gear oil than stamped housings). Axle is vented on the driver’s side.
Yet, with improved durability, our fabricated axle housing is on average 2 pounds lighter than stock style housings of the same size! Add your choice of axle shafts and third member (sold separately), and you are ready to roll. Equip your race car, hot rod or 4X4 with Ford 9 inch parts from Speedway Motors to ensure there are no weak links in your driveline combination.
Total wheel-to-wheel mounting surface width is 60" (from hub-to-hub). The pinion is centered in the housing, which puts the pumpkin offset from center. This housing includes (8) T-bolts for the axle bearing retainer plates and (10) studs for the third member.
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 91047260 |
| Brand | Speedway Motors |
| Hub-to-Hub Width | 60.00" |
| Flange-to-Flange Width | 55.00" |
| Tube O.D. | 3.00" |
| Material Type | Steel |
| GENERAL | |
| Sold in Quantity | Each |
| Notes | Assembled rear end (axle flange face-to-face) width is 60" |
| Standard Pinion Location | Centered Pinion / Offset 3rd Member |
5
4 Reviews
Customers praised the product for its excellent quality, which is apparent in its solid construction and impressive welding. The product is highly recommended as a necessary part for specific builds. Users also voiced their intention to repurchase the product, demonstrating its high level of practicality and usability. The superior quality of the product distinguishes it from competitors.
5
4 reviews
5
4
4
0
3
0
2
0
1
0
Filter by Ratings
I would definitely recommend this product
5.0
a year ago
Kurt
Texas
Verified
Very well made 9" housing. Designed stronger than a stock unit. Welding is very good and looks very nice.
Would Recommend
Super nice housing
5.0
a year ago
Rob
Imperial MO
Verified
Housing quality looks real nice,welds are nice and even ,quite surprised for the price
Yes
5.0
a year ago
Fargo
Bc canada
Verified
Good solid part that I needed on my build!
Would Recommend
I would buy this product again.
5.0
2 years ago
Joe
Paris, Texas
Looks like it's great quality, welds look great. Highly recommend.
Would Recommend
Showing 4 of 4 reviews
1 Question • 1 Answer
What length axle shaft does this specific length housing require?
by Gary
• 2 years ago
1 answer
View Answer
1 of 1 questions shown
