Speedway Chevy Type II Power Steering Hose Kit, AN6

PTFE Hose Ends

Fragola’s new line of Real Street black anodized aluminum, reusable, hose ends for Series 6000 P.T.F.E. hose. Together they eliminate fuel permeation issues common with aftermarket racing hose. A unique “double-swivel” design allows for clocking adjustment after installation. These reusable hose ends feature a miniature “olive” that retains the hose inside of the fitting. By replacing this “olive” the hose end may be reused over and over.

• 90° and 45° hose ends
• -6 AN
• Black anodized finish
• Double-swivel design
• Reusable

PTFE Hose

The properties of P.T.F.E. make it a natural for all highly corrosive applications like automotive brake fluid. P.T.F.E. also works well for hot oil and power steering fluid. The hose will take high pressure and cycle over and over without failure. This hose also handles nitrous oxide with ease.

P.T.F.E. powder is extruded into a smooth bore tube product.  The tube is then fed into a machine that weaves stainless wire into the familiar braided pattern.  The hose is inspected 100% and any flawed sections are discarded.

• -6 AN
• P.T.F.E. lined
• .500" nominal inside diameter
• Working pressure:  1,500 psi.
• Burst pressure:  6,000 psi.
• Minimum bend radius:  6.5" 
• 3' roll of hose

Socketless Fitting

Black socketless push-on hose end fittings will give your engine compartment the look you are after. 90 degree fittings in multiple sizes. For use with 37 degree flared ends.

• -6 AN female to push-on hose barb adapter
• 90° fuel line hose connector
• Lightweight aluminum hose ends are completely reusable, and interchangeable
• 37° angled sealing surface guarantees a positive anti-leak seal
• Available in a Black anodized finish

Push-on Hose

• Working Temp:  -40 to +200 degrees F
• Max Pressure:  300 psi
• 3 ft. length
• Gator brand hose clamp included