|
#91655013
Speedway Billet Aluminum Accelerator Throttle Pedal
- Polished aluminum construction with a urethane bushing at the center
- Pedal is spring loaded
- Serrated shaft allows you to position arm as needed
$60.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Product Summary
Universal Fit, Aluminum, Polished, 4.50" Pedal Length
- Polished aluminum construction with a urethane bushing at the center
- Pedal is spring loaded
- Serrated shaft allows you to position arm as needed
- Easily adjust the angle between the two arms a full 360 degrees
- Pad measures 4.5" x 1.75"
Need To Know
Need help?
855.313.9176Quick and Easy Returns
Return PolicySpeedway Motors 91655013 Details
Speedway Motors 91655013 Details
- Polished aluminum construction with a urethane bushing at the center
- Pedal is spring loaded
- Serrated shaft allows you to position arm as needed
- Easily adjust the angle between the two arms a full 360°
- Pad measures 4.5" x 1.75"
Speedway Motors 91655013 Specifications
Speedway Motors 91655013 Specifications
| KEY SPECS | |
|---|---|
| MFG. Part # | 91655013 |
| Brand | Speedway Motors |
| Material Type | Aluminum |
| GENERAL | |
| Finish | Polished |
| Pedal Length | 4.50" |
| Pedal Width | 1.75" |
| Overall Length | 12.75" |
| Overall Width | 2.38" |
| Centerline of Holes | 1.55" |
| Hole Diameter | .25" |
| Notes | Length from pivot to throttle cable hole is 5.13". From pivot to absolute bottom is 7.63". Has a 360 degree adjustable pivot angle. |
| Sold in Quantity | Each |
Ratings & Reviews
4.7
45 Reviews
Customers highly commend our gas pedal's quality, appearance, and usability. It stands out for being adjustable, allowing it to fit in numerous vehicle models. The pedal's sturdy, quality construction didn't go unnoticed; customers were particularly thrilled with its performance and value for money. Some needed minor modifications for installation, but overall, it exceeds its competitors in terms of value, customization, and reliable function. Customers especially recommend it for restoration projects. They also declared it as a reliable, attractive solution that addresses throttle issues efficiently. Despite minor installation challenges, its benefits far outweigh these, solidifying it as an excellent purchase.
Ratings & Reviews
4.7
45 Reviews
Customers highly commend our gas pedal's quality, appearance, and usability. It stands out for being adjustable, allowing it to fit in numerous vehicle models. The pedal's sturdy, quality construction didn't go unnoticed; customers were particularly thrilled with its performance and value for money. Some needed minor modifications for installation, but overall, it exceeds its competitors in terms of value, customization, and reliable function. Customers especially recommend it for restoration projects. They also declared it as a reliable, attractive solution that addresses throttle issues efficiently. Despite minor installation challenges, its benefits far outweigh these, solidifying it as an excellent purchase.
4.7
45 reviews
5
36
4
5
3
4
2
0
1
0
Most Liked Positive Review
4.0
A good looking pedal
Short mounting block caused the curved pedal to hit the floor. I put a 1 inch square tubing 2 inches long under the mounting block. So it could rotate without hitting the floor.
Most Liked Negative Review
3.0
Throttle pedal
This is a pretty nice pedal. It can be disassembled to flip the pedal and arm to the opposite side. I don't care for the set screw that holds the pedal to the arm. I would have preferred a clamp. The arm is also tapered and the end that the clevis from the throttle cable attaches to is too wide. I had to file the arm flat on the end to attach the cable.
Filter by Ratings
I'd tell a friend about it.
5.0
a year ago
BoostedSlut
Ok
Verified
Pedal assembly is Nice, easy install. I put it into a 1970 c10 with a custom plate for the original pedal location works fine. (Only Disappointment Should have sent me a sticker) 😅
Would Recommend
Just what I was looking for
5.0
2 years ago
T Bucket
Jacksonville fl.
Verified
needed a new accelerator pedal for my T Bucket. This one way perfect for my needs. It fit perfectly where the one I took out was. Nice touch in the old bucket.
Would Recommend
Works perfectly for my application
4.0
2 years ago
Lilred
Washington not the screwed up area
The original gas pedal was so close to the brake pedal, it was impossible to drive unless you have size 5 feet
Would Recommend
Get the best to give the best!
5.0
2 years ago
Rick
Waukesha, wi.
Verified
Gift
Would Recommend
Looks and works great
5.0
3 years ago
Hot Rod Harry
Apple Valley, Ca
Verified
I love the look and the adjustability of the pedal
Would Recommend
Solid gas pedal
5.0
3 years ago
Jeff
South Dakota
Verified
Good solid gas pedal, works well.
Would Recommend
Exactly what I needed
5.0
4 years ago
Lilred
Washington
Verified
Perfect for my 34 ford project. There is no room for a gas pedal in the normal spot, being reversible and 360 deg adjustable the piece fits anywhere
Would Recommend
yes would by again
5.0
4 years ago
Batman
High Point, N C
Verified
Found no problem with it, it bolted right up and I used the new cable I received both worked great. Installed both in a 63 Chevy 2 Nova with a new 383 ci engine worked great.
Would Recommend
I probably wouldn't buy again
3.0
4 years ago
Bob
Eastern Wa
Verified
Pedal is designed to close to floor and I had to put a spacer beneath mount to allow enough travel before pedal hit floor
Would Not Recommend
Excellent quality, extremely fast delivery,
5.0
5 years ago
Hemi 39
Sartell, Minnesota.
Verified
Thirty nine Ford deluxe coupe to a 426 street hemi. Works great.
Would Recommend
Showing 10 of 45 reviews
Questions & Answers
Questions & Answers
9 Questions • 9 Answers
Can this be mounted from firewall? Tech said it was top mounted only. I am replacing one that was similar but mounted flat to firewall.
by Gail
• 8 years ago
1 answer
View Answer
Would this pedal work for on a 64 impala?
by Rick
• 8 years ago
1 answer
View Answer
What is the difference between this one and Part # 91655012 http://www.speedwaymotors.com/Chrome-Steel-and-Billet-Aluminum-Throttle-Pedal,3410.html The other one has all great reviews and slightly cheaper. The bracket to hold the pedal to the firewall on this one seems much thicker and more durable. Is that true and is this a better pedal than the other one in the link?
by Spitfire7
• 9 years ago
1 answer
View Answer
Hi I have 1953 ford f100 This pedal will fit or i need some items and i need brack pedal also
by Abdulmohsen
• 9 years ago
1 answer
View Answer
Does this come with the mounting hardware?
by csmith
• 10 years ago
1 answer
View Answer
I'm not sure if this will mount in my 57 chevy pu....the original throttle bracket goes through the curved upper part of the trans tunnel perpendicular to the throttle pedal with a bracket attached to that shaft and then an arm verticle off that ahaft and solid linkage to throttle and so I'm not sure if will work...thanks for your time in helping an old timer out
by Ray
• 10 years ago
1 answer
View Answer
Is the lever changeable from left to right?
by Ed
• 10 years ago
1 answer
View Answer
What is the throw for this pedal? I am wondering how far the upper arm moves when the pedal is depressed.
by Brody
• 11 years ago
1 answer
View Answer
what cable would i use for a 64 nova switched from a 6 cyl. to a V8 for the excelerator? I like the looks of pedal #916-55013. What cable and carb bracket would work with this part? Thanks
by Kevin
• 15 years ago
1 answer
View Answer
9 of 9 questions shown