|
#91012817
$61.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Universal Fit, 4-9 Fuel Pressure Rating (psi), Aluminum
| MFG. Part # | 91012817 |
| Brand | Speedway Motors |
| Regulator Style | Non-return |
| Material Type | Aluminum |
Need help?
855.313.9176Quick and Easy Returns
Return PolicyThis 2-port pressure fuel regulator is adjustable from 4 to 9 PSI for carbureted applications. Fuel pump regulator includes a steel mounting bracket.
For race/ off road use or for use on pre-1966 vehicles.
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 91012817 |
| Brand | Speedway Motors |
| Regulator Style | Non-return |
| Material Type | Aluminum |
| GENERAL | |
| Fuel Pressure Rating (psi) | 4-9 |
| Pressure Regulator Inlet Size | 3/8" NPT |
| Pressure Regulator Outlet Size | 3/8" NPT |
| Inlet Quantity | One |
| Outlet Quantity | Two |
| Fuel Type | Gasoline |
| Regulator Material | Aluminum |
| Boost/Vacuum Reference Port | No |
| Gauge Port | No |
| Rebuildable | Yes |
| Inlet Attachment | Female Threads |
| Outlet Attachment | Female Threads |
| Fittings Included | No |
| Sold in Quantity | Each |
| Regulator Location | Inline |
| Notes | (2) mount holes 1/4" diameter, 1-3/4" centers |
| Overall Length | 2.75" |
| Overall Width | 2" |
| Overall Height | 3.25" |
3.7
7 Reviews
Customers appreciate the quality and aesthetics of our regulator housing, often favoring it over competitor brands like Holley. While some were initially met with a diaphragm leak, the issue was easily resolved with a supplement repair kit. The product’s adaptability and functionality are noted, particularly for use with cam-driven Hillborn pumps, making it a cost-effective solution. The product's ease of adjusting pressure was praised. Some customers reported issues with regulation and leaks, suggesting room for improvement in our instructions and components. However, overall, the product’s practicality and usability still stand out.
3.7
7 reviews
5
4
4
0
3
1
2
1
1
1
Filter by Ratings
5 stars for Speedway. minus 2 for the USPS.
3.0
3 months ago
Mike
Iowa
Verified
Can't review the fuel regulator Sorry. I did not get it the package.
Would by again
5.0
9 months ago
Flyboy
Florida
Verified
Installed unit on my muscle car and fuel pressure problem resolved.
I'm putting this item on all my carb swap
5.0
2 years ago
Obs guy
Fort Scott ks
Verified
Any future carb swap I do will definitely get this regulator
Would Recommend
Buy for regulator housing
2.0
4 years ago
Dirty sanchez
El Paso Texas
Regulator housing is beautiful, diaphragm leaked immediately. Bought Holley rebuild kit for 9 bucks now it works perfectly. If you buy one get rebuild kit. Still for 30 bucks not bad and better looking than Holley regulator
Would Recommend
Loved it. Would absolutely buy this product again!!
5.0
4 years ago
DragScott
Gardners, PA
Verified
OK, I have a dragster that will eventually have a blower with an 8 hole Crower fuel injector. To start, I plan to run a Holley carb with no blower....just to get used to driving this beast. Rather than buying another fuel pump, this regulator was used with a cam driven Hillborn pump to help bypass fuel back to the tank. It is doing its job perfectly. It was a great temporary solution without having to buy another pump. Thank you Speedway!
Would Recommend
Definitely buy again and always at Speedway Motors
5.0
4 years ago
Pat
Elk point south dakota
Verified
Easy to adjust pressure
Would Recommend
Pretty, but no regulation.
1.0
5 years ago
Mike
Whitney, TX
No instructions with the unit. The bottom fitting is the inlet, the side fittings are outlets. I made my own bracket, spent $15 on brass fittings, and modified my inlet lines. Turn on the electric fuel pump, and this regulator starts leaking. A lot. And the pressure goes right where it was (12 pounds) before I installed it. Took it off, took it apart numerous times, experimented with the adjustment. (Screw the adjusting screw out to lower the pressure, or at least that's how it's supposed to work.) With it assembled, no matter what I do, the ball will not seat well enough to slow the flow. And it still leaks.
Would Not Recommend
Showing 7 of 7 reviews
1 Question • 1 Answer
what are the physical dimensions. Width/length/height in inches
by Jorge
• a year ago
1 answer
View Answer
1 of 1 questions shown
