Menu

Shop

Garage

Cart

Account

Product Summary

Front and Rear Position, 5 on 4.75" Bolt Pattern

  • Provide a significant improvement in braking performance versus the drum brakes your car came with
  • Complete front and rear disc brake conversion kit is perfect for your 1962-67 GM Chevy II
  • Comes complete with new spindles and a power brake booster conversion
  • Includes 11" diameter brake rotors with 5 on 4-3/4" wheel bolt pattern, loaded large GM calipers, caliper brackets, backing plates and rubber brake lines with banjo bolts
  • Includes all necessary bearings, seals, dust caps, and hardware for an easy and complete installation

Comes as a Kit

Key Specs

BrandSpeedway Motors
PositionFront and Rear
Rotor Diameter11 Inch Front | 11.25 Inch Rear
Rotor TypeVented

Need To Know

Quick and Easy Returns

Return Policy

Details

Disc brakes provide a significant improvement in braking performance versus the drum brakes your car came with. This complete front and rear disc brake conversion kit is perfect for your 1962-67 GM Chevy II and comes complete with new spindles and a power brake booster conversion!

The front kit includes 11" diameter brake rotors with 5 on 4-3/4" wheel bolt pattern, loaded large GM calipers, caliper brackets, backing plates, rubber brake lines with banjo bolts, and all necessary bearings, seals, dust caps, and hardware for an easy and complete installation.

The rear kit includes two bolt-on caliper brackets, two 11-1/4" vented rotors, two GM emergency brake style calipers, brake pads, and hardware. We have also included Lokar floor/dash mount e-brake cables.

The power brake booster conversion includes a power brake booster, cast iron master cylinder, proportioning valve kit, pedal rod extension, clevis, and vacuum hose.

Kit contents:

  • 910-36267 1962-67 Chevy II/Nova X-Body Disc Brake Kit
  • 916-641002 62-67 Chevy II 7 Inch Power Brake Booster Conversion 1 Inch Bore
  • 910-31924 GM 10 & 12 Bolt Bolt-On Rear Disc Brake Kit w/ E-Brake
  • 491-80FU Lokar EC-80FU Floor/Dash Mount Emergency Brake Cables

Additional Information:

  • 910-36267 1962-67 Chevy II/Nova X-Body Disc Brake Kit
    • These complete front disc brake kits for 1962-67 Nova and Chevy II cars are designed to work with stock height applications.
    • 11 Inch rotors
    • Loaded large GM calipers
    • Caliper brackets
    • Backing plates
    • Nova stock height spindles w/nuts and washers
    • Brake lines w/banjo bolts
    • Bearings, seals, dust caps, and hardware
    • See Applications for further fitment information
  • 910-31924 GM 10 & 12 Bolt Bolt-On Rear Disc Brake Kit w/ E-Brake
    • RH/LH e-brake calipers
    • 11-1/4" rear brake rotors
    • Bolt-on caliper brackets
    • Caliper bolt kit
    • Rotors have both 5 on 4-1/2" and 5 on 4-3/4" bolt circles
    • Fits axle with a maximum flange diameter of 6-1/4" O.D.
    • 2.780" rotor center hole
    • Does not fit all 10 & 12 bolt axles - check Applications for details
  • 916-641002 Chevy II 7 Inch Power Brake Booster Conversion 1 Inch Bore
    • 7" Power Brake Booster
    • 1" Bore Cast Iron Master Cylinder
    • Bottom Mount Disc Disc Proportioning Valve Kit
    • Prop valve has (2) 3/8"-24 IFF front left & right ports and (1) 9/16"-18 IFF port to rear brakes
    • Pedal Rod Extension
    • Clevis
    • Vacuum Hose
  • 491-80FU Lokar EC-80FU Floor/Dash Mount Emergency Brake Cables
    • Two 8.00' cut to fit lines
    • Used for most GM disc brake calipers with E-brake lever built-in

Additional Information:

    • 910-36267 1962-67 Chevy II/Nova X-Body Disc Brake Kit
      • These complete front disc brake kits for 1962-67 Nova and Chevy II cars are designed to work with stock height applications.
      • 11 Inch rotors
      • Loaded large GM calipers
      • Caliper brackets
      • Backing plates
      • Nova stock height spindles w/nuts and washers
      • Brake lines w/banjo bolts
      • Bearings, seals, dust caps, and hardware
      • See Applications for further fitment information
    • 910-31924 GM 10 and 12 Bolt Bolt-On Rear Disc Brake Kit w/ E-Brake
      • RH/LH e-brake calipers
      • 11-1/4" rear brake rotors
      • Bolt-on caliper brackets
      • Caliper bolt kit
      • Rotors have both 5 on 4-1/2" and 5 on 4-3/4" bolt circles
      • Fits axle with a maximum flange diameter of 6-1/4" O.D.
      • 2.780" rotor center hole
      • Does not fit all 10 and 12 bolt axles - check Applications for details
    • 916-641002 Chevy II 7 Inch Power Brake Booster Conversion 1 Inch Bore
      • 7" Power Brake Booster
      • 1" Bore Cast Iron Master Cylinder
      • Bottom Mount Disc Disc Proportioning Valve Kit
      • Prop valve has (2) 3/8"-24 IFF front left and right ports and (1) 9/16"-18 IFF port to rear brakes
      • Pedal Rod Extension
      • Clevis
      • Vacuum Hose
    • 491-80FU Lokar EC-80FU Floor/Dash Mount Emergency Brake Cables
      • Two 8.00' cut to fit lines
      • Used for most GM disc brake calipers with E-brake lever built-in

Installation note:

910-31924 Instructions

EC80FU E-Brake Cable Instructions

Connector Cable Installation Instructions

Caliper Adjustment Instructions

Brake System Builder's Tip

For more details and installation photos, see this article in Super Chevy magazine.

Additional Information:

    • 910-36267 1962-67 Chevy II/Nova X-Body Disc Brake Kit
      • These complete front disc brake kits for 1962-67 Nova and Chevy II cars are designed to work with stock height applications.
      • 11 Inch rotors
      • Loaded large GM calipers
      • Caliper brackets
      • Backing plates
      • Nova stock height spindles w/nuts and washers
      • Brake lines w/banjo bolts
      • Bearings, seals, dust caps, and hardware
      • See Applications for further fitment information
    • 910-31924 GM 10 and 12 Bolt Bolt-On Rear Disc Brake Kit w/ E-Brake
      • RH/LH e-brake calipers
      • 11-1/4" rear brake rotors
      • Bolt-on caliper brackets
      • Caliper bolt kit
      • Rotors have both 5 on 4-1/2" and 5 on 4-3/4" bolt circles
      • Fits axle with a maximum flange diameter of 6-1/4" O.D.
      • 2.780" rotor center hole
      • Does not fit all 10 and 12 bolt axles - check Applications for details
    • 916-641002 Chevy II 7 Inch Power Brake Booster Conversion 1 Inch Bore
      • 7" Power Brake Booster
      • 1" Bore Cast Iron Master Cylinder
      • Bottom Mount Disc Disc Proportioning Valve Kit
      • Prop valve has (2) 3/8"-24 IFF front left and right ports and (1) 9/16"-18 IFF port to rear brakes
      • Pedal Rod Extension
      • Clevis
      • Vacuum Hose
    • 491-80FU Lokar EC-80FU Floor/Dash Mount Emergency Brake Cables
      • Two 8.00' cut to fit lines
      • Used for most GM disc brake calipers with E-brake lever built-in

Installation note:

910-31924 Instructions

EC80FU E-Brake Cable Instructions

Connector Cable Installation Instructions

Caliper Adjustment Instructions

Brake System Builder's Tip

For more details and installation photos, see this article in Super Chevy magazine.

Application

 

 

Charts

Specifications

KEY SPECS
BrandSpeedway Motors
PositionFront and Rear
Rotor Diameter11 Inch Front | 11.25 Inch Rear
Rotor TypeVented
GENERAL
Bolt Pattern5 on 4.75"
Caliper PistonsOne
Caliper FinishNatural
ColorNatural
Parking Brake ProvisionYes
Minimum Recommended Wheel Diameter15 Inch
Hardware IncludedYes
Sold in QuantityKit
Front Rotor IncludedYes
Front Rotor Diameter11 Inch
Front Caliper IncludedYes
Front Caliper Piston Quantity1
Front Caliper FinishNatural
Rear Caliper IncludedYes
Front Spindles IncludedYes
Master Cylinder IncludedYes
Brake Booster IncludedYes
Parking Brake Cables IncludedYes
Brake Booster Diameter7 Inch
Brake Booster FinishZinc
Brake Booster MaterialSteel
Brake Booster TypeVacuum Diaphragm Single
Rear Rotor IncludedYes