Speedway 3/16 Inch Nickel/Copper Inv Flare 25 Ft Brake Line Kit

Now available for your 3/16" brake line consideration is a new Nickel/Copper brake line inverted flare kit. This complete kit included a 25 foot roll of 3/16 inch Nickel/Copper/Iron Alloy Tubing along with 3/8-24 inverted flare threaded tube nuts. 

• 3/16" x 25' Nickel/Copper/Iron Alloy Tubing that meets SAE Standard J1047 and ISO 4038 meeting all international and U.S. requirements for brake tubing
• Nickel/Copper alloy is approximately 9.2% Nickel, 1.4% Iron, 0.8% Manganese and 88.6% Copper
• Nickel/Copper has the strength and structural integrity of steel lines but with the added benefit of being much more corrosion resistant
• Nickel/Copper is also easier to bend and form than steel tubing, bends 58% easier than steel tubing
• Commonly referred to as '90-10 copper' and has a copper color
• Nickel/Copper is considered the super-premium brand in brake lines and does not rust or corrode
• Nickel/Copper has been used on hydraulic/fluid transfer systems on vehicles where steel lines and tubing are commonly used.  This includes brake, fuel and transmission systems.
• Available in a 25' roll of 3/16" line, inverted flare nuts included
• This line bends easily and smoothly with hand tools and can be flared with a 45° double flaring tool
• 3/8"-24 inverted flare male brake line nuts included

Kit includes

• (1) Speedway 3/16 Inch Nickel/Copper Brake Line, 25 Ft. Roll
• (2) Bags of 5 Inverted Flare Thread Nuts for 3/16 Inch Tubing, 3/8-24

Learn more about flaring lines and how to select proper automotive fittings by reading our tech article. The Principles of Automotive Fittings. 

Brake System Builder Tip (GIF)