#91095121
Speedway 3/16 Inch Inv Flare 25 Ft Brake Line Kit w/ Flare Tool
by
Speedway Motors- NiCopp is brake line tubing that is easier to bend and form that steel tubing, bends 58% easier than steel tubing and can be flared with a 37° AN flaring tool, or 45° double flaring tool
- NiCopp is considered the super -premium type of brake line and has the strength and structural integrity of steel lines but with the added benefit of being much more corrosion resistant
See More
$98.99
kit
In Stock
Add to a list
Share
Select a vehicle to verify Fitment
Select Vehicle
Product Summary
Universal Fit, Nickel Copper Alloy, 0.188" Tube O.D.
- NiCopp is brake line tubing that is easier to bend and form that steel tubing, bends 58% easier than steel tubing and can be flared with a 37° AN flaring tool, or 45° double flaring tool
- NiCopp is considered the super -premium type of brake line and has the strength and structural integrity of steel lines but with the added benefit of being much more corrosion resistant
- 3/16" x 25' Nickel/Copper/Iron Alloy Tubing commonly referred to as '90-10 copper' and is approximately 9.2% Nickel, 1.4% Iron, 0.8% Manganese, and 88.6% Copper
- NiCopp does not rust or Corrode and should be considered where the longest life-span for lines is required and / or where a direct OEM replacement alternative is desired
- Kit Includes (1) Speedway 3/16 Inch Ni/Copp Nickel/Copper Brake Line, 25 Ft. Roll, (1) Bag of 5 Inverted Flare Thread Nuts for 3/16 Inch Tubing, 3/8-24 and (1) Titan Tools 51535 Double Flaring Brake Line Tool,45-Deg,3/16 Tube
Comes as a Kit
View Kit Components
See more details
Key Specs
MFG. Part # | 91095121 |
Brand | Speedway Motors |
Material Type | Nickel Copper Alloy |
Overall Length | 25 ft. |
Finish | Natural |
See more specs
Need To Know
Free Shipping on Orders Over $149
Shipping Policies & FAQsNeed help?
855.313.9176Quick and Easy Returns
Return PolicyDetails
Details
Now available for your 3/16" brake line consideration is a new NiCopp Nickel/Copper inverted flare brake line with flare tool! This complete kit included a 25 foot roll of 3/16 inch Nickel/Copper/Iron Alloy Tubing along with 3/8-24 inverted flare threaded tube nuts and a Titan Tools flaring tool to build high quality brake lines.
- 3/16" x 25' Nickel/Copper/Iron Alloy Tubing that meets SAE Standard J1047 and ISO 4038 meeting all international and U.S. requirements for brake tubing
- NiCopp alloy is approximately 9.2% Nickel, 1.4% Iron, 0.8% Manganese and 88.6% Copper
- NiCopp has the strength and structural integrity of steel lines but with the added benefit of being much more corrosion resistant
- NiCopp is also easier to bend and form than steel tubing, bends 58% easier than steel tubing
- Commonly referred to as '90-10 copper' and has a copper color
- NiCopp is considered the super-premium brand in brake lines and does not rust or corrode
- NiCopp has been used on hydraulic/fluid transfer systems on vehicles where steel lines and tubing are commonly used. This includes brake, fuel and transmission systems.
- Available in a 25' roll of 3/16" line
- This line bends easily and smoothly with hand tools and flares easily created with the included flare tool
- Included flare tool is lightweight and compact for use in tight areas
- Use in conjunction with the included 3/8"-24 inverted flare male brake line nuts
Kit includes
- (1) Speedway 3/16 Inch Ni/Copp Nickel/Copper Brake Line, 25 Ft. Roll
- (1) Inverted Flare Thread Nuts for 3/16 Inch Tubing, 3/8-24
- (1) Titan Tools 51535 Double Flaring Brake Line Tool, 45-Deg, 3/16 Tube
Learn more about flaring lines and how to select proper automotive fittings by reading our tech article. The Principles of Automotive Fittings.
Charts
Brake System Builder Tip (GIF)
Specifications
Specifications
KEY SPECS | |
---|---|
MFG. Part # | 91095121 |
Brand | Speedway Motors |
Material Type | Nickel Copper Alloy |
Overall Length | 25 ft. |
Finish | Natural |
GENERAL | |
Tube O.D. | 0.188" |
Fitting End A | 3/8"-24 IFM |
Fitting End B | 3/16 Tube |
Thread Pitch | 3/8"-24 IFM |
Sold in Quantity | Kit |
Outer Braid | No Outer Braid |
Inlet Fitting Angle | Straight |
Outlet Fitting Angle | Straight |