|
#91015225
$193.99
/each
In Stock
Order soon, only 1 left in stock!
Quantity
Need Help? Call to Order
Add to a list
Select an engine to verify Fitment
Select Engine
Serpentine Belt Type, 23.50" Belt Length, Aluminum
| MFG. Part # | 91015225 |
| Brand | Speedway Motors |
| Belt Type | Serpentine |
| Material Type | Aluminum |
| Finish | Anodized |
Need help?
855.313.9176Quick and Easy Returns
Return PolicyThere is no need to turn that power-robbing water pump any faster than it needs to go. These billet pulleys are the lightest you will find and are hard anodized for durability. Includes a serpentine belt (replacement belt when required will be a Goodyear 4040235 belt application).
The crank pulley is 2-3/4" and the pump pulley is 4-1/2".
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 91015225 |
| Brand | Speedway Motors |
| Belt Type | Serpentine |
| Material Type | Aluminum |
| Finish | Anodized |
| GENERAL | |
| Belt Length | 23.50" |
| Groove Count | 4 |
| Shaft Diameter | .43" |
| Belt Width | .55" |
| Bolt Hole Pattern | 4 on 1.75" |
| Hardware Included | No |
| Sold in Quantity | Each |
4.7
9 Reviews
Customers highly recommend the product, praising its excellent lightweight construction and rigorous durability, perfect for racing applications. The pulleys fit well in various car models and notably reduced weight for improved performance. The product stands out for its practicality and quality, with users appreciating the easy-to-read timing marks on the lower pulley. Minor adjustments may be needed for perfect alignment, but even with a slightly loose fit, the belt stays intact, showing the product's reliability. The product's effectiveness outpaces competitors, making it a repeat purchase for many customers.
4.7
9 reviews
5
6
4
3
3
0
2
0
1
0
Filter by Ratings
Defintely recommend these parts
5.0
a year ago
charliemoore29
Ft Worth, TX
Verified
Parts fit perfectly and look great.
Would Recommend
Great buy
5.0
5 years ago
Krazyk
Moravia,ia
Good parts just how do you get the crank pulley off do you need a special tool ?? Need to get timing belt replaced and help appreciate
Would Recommend
I done brought 2 sets would recommend to anyone
5.0
7 years ago
Superman
Dallas,Georgia
Verified
I have a 4 car mini stock race team I have this product on 2 of the 4 cars
Would Recommend
yes, I would buy again.
4.0
8 years ago
IMracing
Boise, ID
Verified
Fit our Ford 2.3 perfectly. Cut about 2 lbs. of weight.
Would Recommend
I would buy this product again
4.0
8 years ago
Rex
Chicago
Verified
Use it on a circle track
Would Recommend
I love these pulleys.. Light weight and nice timing marks.
5.0
9 years ago
33 racer
Richmond ky
Verified
Nice set up. Light weight, well made and easy to read timing marks on the lower pulley.
Would Recommend
Great part fit well GREAT sales person
5.0
9 years ago
Ken
Williamston sc
Verified
Bolted right on ,well built .
Would Recommend
I would buy it again
5.0
9 years ago
DFR
Annville, PA
Verified
using on my race car
Would Recommend
I would buy this product again
4.0
10 years ago
Rundall
Pulaski, TN
Verified
I am using these pulleys on a ministock. After I made a bushing to center the top pulley on the water pump, they fit nicely. Although the belt seems too loose to me, it does stay on. The bottom pulley has timing marks on it which made it nice.
Would Recommend
Showing 9 of 9 reviews
7 Questions • 8 Answers
does this fit 1985 mustang svo?
by scott
• 8 years ago
1 answer
View Answer
With these pulleys being so much lighter than stock will u have to change flywheel to help offset the balance so I am not goung to ruin front and rear seals?
by Richard
• 9 years ago
2 answers
View Answers
i am looking for the crankshaft pulley for a 1986 ford ranger that has a 2.3 motor not diesel and the hardware for the pulley as well. will this work and do you also have the hardware for the installation
by josh
• 10 years ago
1 answer
View Answer
Will these work on a 93 mustang 2.3 if im not using the ac compressor?
by TAP
• 10 years ago
1 answer
View Answer
does the crank pulley have the degree number on it for the timing does it have numbers on crank pulley I see some white painting but can not see image clear to see what it is
by bear
• 13 years ago
1 answer
View Answer
I have this kit on my car and the belt broke, what size belt do I need?
by
• 14 years ago
1 answer
View Answer
Hw many groves are on the pulleys? thanks
by
• 15 years ago
1 answer
View Answer
7 of 7 questions shown
1984-1986 Ford Mustang
Ford Lima 2.3
2018-2022 Ford Mustang
2.3 Ford Inline Four
1974-1980 Ford Pinto
Ford Lima 2.3
1983-1988 Ford Thunderbird
Ford Lima 2.3
1969-1973 Mercury Capri
Ford Lima 2.3
