|
#46598499
$187.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Universal Fit, Aluminum, 4" Tube O.D., Polished
| MFG. Part # | 98499 |
| Brand | Spectre Performance |
| Material Type | Aluminum |
| Tube O.D. | 4" |
| Finish | Polished |
Need help?
855.313.9176Quick and Easy Returns
Return PolicySpectre's polished cast aluminum low profile plenum has a 4 inch inlet. It is 2.4 inches tall between the carburetor and the bottom of the hood which makes it great for low clearance applications. It measures 9.25 inches from the air cleaner stud to the inlet and 7.25 inches across the plenum at the air cleaner stud. This plenum fits carburetors and TBI throttle bodies with a 5-1/8 inch inlet. The 4 inch single inlet is designed to match up to all Spectre 4 inch tubing, filters and accessories. Use with Spectre 4208 air cleaner nut (sold seperately).
Features
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 98499 |
| Brand | Spectre Performance |
| Material Type | Aluminum |
| Tube O.D. | 4" |
| Finish | Polished |
| GENERAL | |
| GTIN Code | 089601984995 |
| Inlet Quantity | Single |
| Sold in Quantity | Each |
4.3
10 Reviews
Customers highlight the product's exceptional performance and practicality, with specific mention of it greatly assisting with hood clearance issues. Many were satisfied with the overall design and its ability to enhance air flow, even on different car models. While some users found fault with the product's finish and polishing, they confirmed this did not negatively impact functionality. A few even took measures to improve the finish themselves. The product was recommended over competitors for its quality and price point.
4.3
10 reviews
5
7
4
1
3
1
2
0
1
1
Most Liked Positive Review
5.0
Nice product
It came polished, and they left the casting flaws on the outside, and polished over them. Did not look good enough as is, so I sanded them smooth and powder coated it. I think for the price paid, it should have been better polished, and smoothed.
Most Liked Negative Review
3.0
Rough finish lowest the score
Nice product, but finishing is poor, it can not be said to be polished, its more like sanded and still its only 80% done.
Filter by Ratings
Severely disappointed
1.0
a year ago
Disappointed
Indiana
Verified
The quality of this part is extremely poor.
Would Not Recommend
This was the perfect low profile intake for my twin turbos
5.0
a year ago
JCT
New York
Verified
I put twin turbos in my 1969 Camaro and this was the perfect low profile intake I needed
Would Recommend
Fast shipping, good design, works well
4.0
4 years ago
427Galaxie
Portland OR
Verified
Poor polishing by manufacturer- not a fault of Speedway. Function was not impaired.
Would Recommend
Nice product
5.0
5 years ago
Bobby Baker
West of St. Louis
Verified
It came polished, and they left the casting flaws on the outside, and polished over them. Did not look good enough as is, so I sanded them smooth and powder coated it. I think for the price paid, it should have been better polished, and smoothed.
A must for hood clearence
5.0
5 years ago
Mike
Ft worth
Verified
A must have if you think you will have hood clearence issues Very well built. This word perfect for my 87 mustang 408w carbbed with 2.5" cobra r hood
Would Recommend
Would buy again and again
5.0
6 years ago
scout 75
ponca city,ok
Verified
Installed on a 1975 scout with fitec fuel injection setup fit great under the hood, looks good allows for more air flow
Would Recommend
Great trade
5.0
7 years ago
Brian
New Zealand
Verified
Great product and it fitted perfectly. The finish was better than expected and it only took 3 weeks to arrive to nz which isn't bad
Would Recommend
Prompt service and shipping
5.0
7 years ago
Dwayne
Hickory, NC
Verified
Best price I could find, quick turn around from order to part being shipped.
Would Recommend
I would buy this again...
5.0
8 years ago
DoubleR
Ringgold Ga
Verified
Put it on a 60 Corvette for hood clearance.
Rough finish lowest the score
3.0
8 years ago
Mr.lake
Finland
Verified
Nice product, but finishing is poor, it can not be said to be polished, its more like sanded and still its only 80% done.
Showing 10 of 10 reviews
1 Question • 2 Answers
Is there an air filter available to fit inside of this? something similar to Part # 92511900. I dont have much room or good options for a remote filter.
by david
• 8 years ago
2 answers
View Answers
1 of 1 questions shown
