|
#91123318
Specialty Power Windows Wiper Knurl Stub, 0.25 Inch I.D.
- 1/4" Inside diameter
- 1/2" Outside Diameter
- Sold each
$7.19
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Need To Know
Need help?
855.313.9176Quick and Easy Returns
Return PolicySpecialty Power Windows KNURL 1/4" ID Details
Specialty Power Windows KNURL 1/4" ID Details
Specialty Power Windows introduces this wiper knurl stub. Wiper knurl stub has a 1/4 inch inside diameter and a 1/2 inch outer diameter with splines. Sold each.
- 0.25" inside diameter
- 0.50" outer diameter
- Sold each
Specialty Power Windows KNURL 1/4" ID Specifications
Specialty Power Windows KNURL 1/4" ID Specifications
| KEY SPECS | |
|---|---|
| MFG. Part # | KNURL 1/4" ID |
| Brand | Specialty Power Windows |
| GENERAL | |
| Sold in Quantity | Each |
| Notes | (2) TAPPED HOLES. (2) DOG POINT SET SCREWS |
Ratings & Reviews
4.7
19 Reviews
Customers rate our product practically useful for various vintage cars such as 1954 Chevy truck, 1956 Ford F100, 1966 Chevy P10 and 41 Dodge Coupe. While some modification may be required, the component is versatile and adaptable. Users highlighted the good quality and excellent fit, acknowledging its utility in maintaining originality on vehicle projects. Some suggest the inclusion of an extra set screw. Despite the need for minor adjustments like filing down the set screw for fit, the component delivers reliable performance.
Ratings & Reviews
4.7
19 Reviews
Customers rate our product practically useful for various vintage cars such as 1954 Chevy truck, 1956 Ford F100, 1966 Chevy P10 and 41 Dodge Coupe. While some modification may be required, the component is versatile and adaptable. Users highlighted the good quality and excellent fit, acknowledging its utility in maintaining originality on vehicle projects. Some suggest the inclusion of an extra set screw. Despite the need for minor adjustments like filing down the set screw for fit, the component delivers reliable performance.
4.7
19 reviews
5
16
4
1
3
1
2
1
1
0
Most Liked Positive Review
5.0
Exactly what I needed!!!!
I could not find the original wiper axles with good knurl and this Lil piece rite here saved the originality on my 1966 chevy P10. With a Lil machining we good to wipe off another 50 years.
Most Liked Negative Review
3.0
Cheaply made but useable
It works to convert 1/4" wiper motor shaft to a 1/2" . The set screw is too long so you either have to grind the point off the set screw (losing its ability to bite into the shaft) or grind a rather large flat on the wiper motor shaft. Don't forget to add a little blue loctite to the set screw so it doesn't loosen.
Filter by Ratings
I would definitely recommend this product
5.0
3 months ago
Big Dog
Sterling. Co.
Verified
I replaced the wiper knurls on my 41 Ford coupe. These fit great and are direct replacements - great product that is hard to find - thank you Speedway for having them in stock.
Would Recommend
Yes.
5.0
a year ago
Nash
Hawaii
Verified
For my wipers.
Would Recommend
Definitely a life saver on my 1954 dodge c3
5.0
a year ago
Papa "D"
Coupeville Wa
Verified
Fit like a charm!!! Was able to use as a alternative option!!
Would Recommend
I would buy this product againl
5.0
2 years ago
Smitty
Southaven Ms
Verified
Replaced broken knurl nuts for wiper arms.
Would Recommend
Perfecto.
5.0
2 years ago
Jack
Seal Beach, CA
Verified
Great experience from beginning to end.
Would Recommend
didn't fit 55 ford F100
2.0
5 years ago
mustangtoo
yakima
Verified
Unfortunately this "universal" fit item did not work for the wipers on my 55 F100. But it was inexpensive enough to take a gamble on and I'm sure I'll need it on another project.
Would Recommend
Yes
5.0
6 years ago
None
Vallejo
Verified
I have a 41 Dodge Coupe. I was not able to find the original piece. With a little bit of modification this work perfect
Would Recommend
Cheaply made but useable
3.0
6 years ago
gcpoland
Kingston, NH
Verified
It works to convert 1/4" wiper motor shaft to a 1/2" . The set screw is too long so you either have to grind the point off the set screw (losing its ability to bite into the shaft) or grind a rather large flat on the wiper motor shaft. Don't forget to add a little blue loctite to the set screw so it doesn't loosen.
Would Not Recommend
needed it got it
4.0
7 years ago
ding
iowa
Verified
all in all good quality for the price and great service getting it out
Would Recommend
I would buy again. Great find
5.0
7 years ago
DKJ
Ogden, Utah
Verified
Fit the shaft & allowed me to mount my wipers on a 1954 chevy truck. Had to file set screw down to get wiper arm over it. I would buy again.
Would Recommend
Showing 10 of 19 reviews
Questions & Answers
Questions & Answers
1 Question • 1 Answer
My 1965 Volvo amazon has 1/4" drive post for mounting the bushings. What does the bottom or other side look like? Is it like what is shown i n this image or is there a recess for a 3/8 or so washer/seal ring? I like the set screw feature and would like to use these. Thanks
by Mike
• 3 years ago
1 answer
View Answer
1 of 1 questions shown