Small Block Chevy Solid Lifter Tight Lash Cam, 2750-6500 RPM

#91515001

Small Block Chevy Solid Lifter Tight Lash Cam, 2750-6500 RPM

Name: Small Block Chevy Solid Lifter Tight Lash Cam, 2750-6500 RPM
Brand: Speedway Motors
SKU: 91515001
Price: 177.99 USD
Availability: InStock
Rating: 4 (1 reviews)

1 Review

4 Questions

Tight lash series produces broad range of power
Superior lobe design

$177.99

/each

In Stock

Quantity

Need Help? Call to Order

Add to a list

Select an engine to verify Fitment

Select Engine

Product Summary

Solid Flat Tappet Camshaft Type, 2750-6500 RPM Range

Tight lash series produces broad range of power
Superior lobe design

See more details

Key Specs

Camshaft Type	Solid Flat Tappet
RPM Range	2750-6500
Intake Duration (.050" Lift)	245
Exhaust Duration (.050" Lift)	251
Lobe Separation	106 °

See more specs

Need To Know

Need help?

855.313.9176

View the Help Center

Quick and Easy Returns

Return Policy

Speedway Motors 91515001 Details

Speedway Tight Lash cams produce a broad range of power due to the short amount of cam degrees it takes to go from .020" lift to .050" cam lift. This is known as major intensity. The shorter the span the more torque the lobe will produce, and for the lobe to run excellent up at higher RPM, it must have an excellent area under the curve. You can tell these do because of the very high duration at .200" cam lift.

Compare our numbers to other cam profiles and you will find that these are far superior!

Item Details

355-377 ci, high torque 1/4-3/8 mile oval power.

IMCA Approved.

Charts

915-15001 Instructions (PDF)

Cam Card - 91515001 (PDF)

Cam Application Chart (GIF)

Guides & Documents

Camshafts Installation Instructions (91515001)

Camshafts Technical Information (91515001)

CARB Warning

For race/ off road use or for use on pre-1966 vehicles.

Emissions warning: this part only legal for sale or use in California for racing (competition) vehicles which may never be used, registered, or licensed for use upon a public highway, or if installed in vehicles model-year 1965 or older; motorcycles model-year 1977 or older; or off-highway recreational vehicles (such as off-road motorcycles and all-terrain vehicles) model-year 1996 and older. Any other use renders the vehicle tampered and not legal for use on California public highways (any public street or roadway, public dirt road, public park, or publicly maintained right of way open to the use of the public for vehicular travel). Violations subject to $37,500 penalty per violation per vehicle, revocation of registration, loss of use on California public right of ways, and proof of correction for tampering. There are similar restrictions and penalties under federal law and the laws of all other states with penalties under federal law of up to approximately $45,268 per tampered vehicle and/or engine.

CA WARNING:

Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov

CARB warning

Speedway Motors 91515001 Specifications

KEY SPECS
MFG. Part #	91515001
Brand	Speedway Motors
Camshaft Type	Solid Flat Tappet
RPM Range	2750-6500
Intake Duration (.050" Lift)	245
Exhaust Duration (.050" Lift)	251
Lobe Separation	106 °

GENERAL
Intake Duration	282
Exhaust Duration	301
Sold in Quantity	Each

Ratings & Reviews

1 Review

Write A Review

1 reviews

Filter by Ratings

Sort Reviews

lacking information

4.0

4 years ago

rod austin

calhoun ky

i was told from a reliable source that comp cams grinds most/all of speedway house brand cams. my complaint upon recthe cam is there is NO INFO included in the cam box. NO SPEC CARD to tell me what cam is in that box. just a generic white box with only speedway part#. there's no indication stamped on the cam to tell what company or grind it is. if this truly is a comp cams(which i believe it is) the least they could do is supply a cam spec card! time will tell if it lives after a few miles... i will be very careful on breakin procedures. i will update

Would Recommend

Showing 1 of 1 reviews

Questions & Answers

4 Questions • 4 Answers

Sort Questions

what distributor gear dose this can need

by ace902001

• 8 months ago

1 answer

View Answer

What lift of cam is this? Want a solid lift cam for the street. I have manual brakes, so I dont need vacuum.

by tim

• 7 years ago

1 answer

View Answer

Valve spring recommendation Looking for a valve spring that will work without removing heads for machining. Running 200cc iron eagles with stock length valves. Cut for 1.550" springs but i only have 1.730" from spring seat to retainer not including shims. I am also running 1.6:1 rockers.

by 1969C10

• 12 years ago

1 answer

View Answer

will these work in a 383 stroker engine or will there be clearance issues?

by strykr

• 15 years ago

1 answer

View Answer

4 of 4 questions shown

Fitment

1962-1963 Chevy Corvette

Gen 1 L76 Small Block Chevy

1960-1967 GMC Suburban

Gen 1 L76 Small Block Chevy