Menu

Shop

Garage

Cart

Account

Product Summary

Chevy Small Block V8, Solid Flat Tappet Camshaft Type

    Key Specs

    MFG. Part #91514101
    Camshaft TypeSolid Flat Tappet
    RPM Range3500-7500
    Intake Duration291
    Exhaust Duration298

    Need To Know

    Free Shipping on Orders Over $149

    Shipping Policies & FAQs

    Quick and Easy Returns

    Return Policy

    Details

    Our solid flat tappet cams offer superior performance and the very best value. These grinds are tried and tested!

    Note: This cam is not drilled for an accessory drive. Many sprint cars use a fuel pump, power steering, or dry sump oil pump mounted to the rear of the engine which is driven off of the back of the camshaft. This requires that the cam be drilled and tapped for the drive spud. Our flat tappet cams DO NOT have this modification. (Our roller cams already have this modification incorporated when manufactured.)

    If you are running a sprint or modified that uses a rear cam accessory drive and your local rules dictate that you run a flat tappet cam, you will have to take the cam to a competent machinist and have it drilled and tapped for the drive spud.

    Item Details

    Mechanical - IMCA Modified - 3/8-1/2 mile track, good mid-range H.P. Broad torque range, a proven winner.

    Charts

    Specs

    Hot Valve Lash Settings:

    • 0.026" Intake
    • 0.028" Exhaust

    CARB Warning

    For race/ off road use only

    Emissions warning: this part only legal for sale or use in California for racing (competition) vehicles which may never be used, registered, or licensed for use upon a public highway. Any other use renders the vehicle tampered and not legal for use on California public highways (any public street or roadway, public dirt road, public park, or publicly maintained right of way open to the use of the public for vehicular travel). Violations subject to $37,500 penalty per violation per vehicle, revocation of registration, loss of use on California public right of ways, and proof of correction for tampering. There are similar restrictions and penalties under federal law and the laws of all other states with penalties under federal law of up to approximately $45,268 per tampered vehicle and/or engine.

    Specifications

    KEY SPECS
    MFG. Part #91514101
    BrandSpeedway Motors
    Camshaft TypeSolid Flat Tappet
    RPM Range3500-7500
    Intake Duration291
    Exhaust Duration298
    GENERAL
    Intake Duration (.050" Lift)252
    Exhaust Duration (.050" Lift)262
    Lobe Separation106 °
    Sold in QuantityEach